See the FAQ's on how to pull stats from your DSL modem.

Follow those instructions and pull the modem stats and do a screen save of those stats.

If your alarm system is monitored you should notify your alarm company that you would like your alarm system monitoring placed into a test status and be sure they understand not to dispatch on any signals received.

Before proceeding BE SURE you have the disarm code for the alarm system!!!!!!!!

Locate the RJ31X jack the alarm system is plugged into (usually adjacent to the alarm system control panel) and unplug the line cord inserted into the jack.

After unplugging the cord your alarm system may go into a local trouble or alarm indication. In most cases you will need to enter the disarm code to silence this alarm.

With the alarm system unplugged from the RJ31X jack reset the DSL modem and again pull the stats. If you see a substantial difference the alarm system is causing a problem.

DO NOT forget to reconnect the cord from the alarm system control panel to the RJ31X jack and test the alarm system for proper communication.

Splitpair

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by Splitpair edited by jazzman916
last modified: 2004-10-15 19:53:33