I did not see this information posted anywhere in the Speakeasy Forum so I thought I would contribute... If this information is already known, sorry for the useless post.

This is a config that I wrote last night for the WIC-1ADSL card running on Speakeasy with static services. The IOS version on the 2621XM is 12.3.10, Enterprise Basic.

If you have any questions, please let me know.

_________________________________________

bridge irb
!
interface FastEthernet[#/#]
[Inside IP Address] [subnet]
ip nat inside
!
interface ATM[#/#]
no ip address
no atm ilmi-keepalive
bundle-enable
dsl operating-mode auto
no clns route-cache
bridge-group [#]
hold-queue 224 in
pvc 0/35
encapsulation aal5snap
!
!
interface BVI[#]
ip address [Primary IP Address] [subnet]
ip address [Additional IP Address] [subnet] secondary
ip address [Additional IP Address] [subnet] secondary
ip address [Additional IP Address] [subnet] secondary
ip nat outside
!
ip nat inside source list [#] interface BVI[#] overload
!
ip route 0.0.0.0 0.0.0.0 BVI[#]
!
access-list [#] permit [Inside IP Addresses][Wild-Card Mask]
!
bridge [#] protocol ieee
!
bridge [#] route ip
!

[Thank you NetEngineer9 for contributing this.]

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by borborpa