dslreports logo
site
spacer

spacer
 
    All FAQs Site FAQ DSL FAQ Cable Tech About DSL Distance DSL Hurdles »»
spc

spacer




how-to block ads



This Section
In almost all situations you will unable to access the Westell modem interface if you use it in conjunction with another router. The reason is that the Westell modem interface address is 192.168.1.254 which is a local IP. By default, most routers do not have the capability to route a local IP out of their WAN port (where your Westell is connected). Additionally, they may be on completely different subnets. You must connect the Westell directly to the computer's NIC to make the necessary changes before you connect the other router. After you have made the changes to the Westell you can then connect the router and configure it for use with FastAccess.

There are several alternatives around this problem. One method involves extra equipment (second NIC and a hub) and major configuration changes. The second method requires you to utilize the router as a simple switch and use the Westell's PPPoE and DHCP functions. Click here for more information.

Check the BellSouth FAQs for specific router instructions. Generic Westell and router configuration information can be found here.
Andy Houtz DSL

Expand got feedback?

by FAQFixer See Profile
last modified: 2006-12-27 22:23:19