NOTE:
When using a DSL Broadband connection with PPPoE, please refer to WAN Settings for possible configuration issues.

Connect the DVG's WAN port to the appropriate BROADBAND modem, router, or hub, depending on your LAN configuration. Keep in mind the Power Up Sequencing requirements for your LAN configuration.

The correct WAN Settings (either PPPoE or *WAN DHCP*) should have been set by Primus when you ordered your TBB service, unless you asked to do it yourself. If the WAN settings are correct, the DVG ATA should now have access to the Internet.

If there was an error in configuration by Primus, or you have changed BROADBAND connections or your LAN configuration (you are travelling, changed ISP...), you may need to modify the WAN Settings.

[If the DVG ATA hangs at any point, restart your steps from the very beginning after following the necessary powerup sequence for your configuration.]

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by canoe
last modified: 2005-07-17 23:43:05