Warning:
If your POTS line is active and attached to your house wiring, DO NOT CONNECT THE HOUSE WIRING TO either jack labelled "1" or "2" as this will damage the ATA.

Refer to House Wiring if you wish to connect your house wiring (disconnected from your POTS line) to either of these ATA's jacks.

•The telephone jack port labelled "1", on the rear of the ATA, is used for your Primary TBB line. Simply plug your phone(s) or House Wiring into this port.

•The telephone jack port labelled "2" (not available on all ATAs currently in use by Primus) is used for a different (second) Primary TBB line, if you have one. Simply plug your phone(s) or secondary line of your House Wiring into this port.

Remember, Alternate Numbers ring on their respective Primary TBB line.
•The LINE jack is used to connect an active POTS LINE to the D-Link DVG ATA.

Remember to verify the Cables and Jacks on the ATA and telephone(s); especially if you have any problems.

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by canoe edited by Styvas
last modified: 2007-01-31 18:57:40