|
| ||||
 |
|
Home | Reviews | Tools | Forums | FAQs | Find Service | ISP News | Maps | About |
|
how-to block ads |
Sometimes Shareaza won't automatically connect to Gnutella 1 clients (Bearshare, Limewire, etc). When that happens, you will need to connect manually using the host cache. You can either press F8 or View->Host Cache to bring up the window. Select about 10-15 from the list and right click, selecting "Connect Now". This number may seem a bit high, but may be needed to get the default 2 G1 connections when the network is busy.  got feedback?Into my cache G1 there is nothing, after pressing F8 ( automatic connection to G1 is selected in options). 2012-10-10 14:02:12 All right now! A lot of thanks. 2012-11-27 15:40:09 In newer versions of Shareaza, there is an option which must be enabled in order to connect to Gnutella1. Switch to Power Mode to see Advanced settings (View -> Power Mode). Then, in Advanced settings (Tools -> Shareaza Settings -> Advanced), set Discovery.EnableG1GWC to 'True' by highlighting the setting and clicking the 'Value' check box. Click 'Apply' and 'OK', and discovery of Gnutella1 hosts should start immediately (assuming you have G1 discovery services registered). 2012-11-23 11:30:39 by Doctor Four | ||||
| Wednesday, 19-Jun 20:39:42 | Terms of Use & Privacy | feedback | contact | Hosting by nac.net - DSL,Hosting & Co-lo over 13.5 years online © 1999-2013 dslreports.com. |
