After many hours of trial and error to accomplish what should be a simple task of putting a device into the DMZ zone I came upon this easy solution. Login in to the router. Click on configuration and then single static IP. Choose the IP of the device you want to enter into the DMZ. Such as a PC, VOIP device, etc. Click enable on the bottom. While the router is rebooting, check that the device is setup for DHCP. After router reboots, reboot the device and your done.
Various threads on this subject:
»[modem/router] Versalink router DMZ
»Versalink 327
- bilbo4fun 
 feedback form
 feedback form
by bilbo4fun edited by Riss_Centaur
last modified: 2005-10-30 11:12:51 |
