BA
(PPPoE)
Telnet to router

setup menu 1
with any system name, or blank
domain name has to be your ISP i.e. "bellatlantic.com", "verizon.net",
enter thru and save,

go to menu 2,
use space bar to toggle to ip address attached on LAN,
type ip address of your pc i.e. "192.168.0.2",
enter thru and save.

Go to menu 4,
set Encapsulation to PPPoE,
set login, which could be either "username" or "username@domainname", and password,
leave everything as default, dynamic ip address, sua to yes.
Enter thru and do a test, you should get IPCP opened for last command.

Go to menu 24.1,
check for WAN IP address, if it is showing,
then you can open browser.

GTE
(DHCP)
Telnet to router

setup menu 1
with any system name, or blank
domain name has to be your ISP i.e. "vz.dsl.genuity.net",
enter thru and save,

go to menu 2,
use space bar to toggle to ip address attached on LAN,
type ip address of your pc i.e. "192.168.0.2",
enter thru and save.

Go to menu 4,
set Encapsulation to Ethernet,
login and password are N/A
leave everything as default,
Enter thru and do a test, you should get IPCP opened for last command.

Go to menu 24.1,
check for WAN IP address, if it is showing,
then you can open browser.

(temp)

FAQ by kadar

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by edited by kadar
last modified: 2002-08-26 18:46:03