This is a quote from the Sipura 2100 FAQ:
I connect my SPA-2100 to another router which gives out 192.168.0.x IP address.
Please realize that the LAN IP address of SPA-2100 has an IP address of 192.168.0.1, and it will provide DHCP addresses on that subnet. If you have another router that this SPA connects to, be sure that the router does not assign the same subnet of 192.168.0. Otherwise it will cause a conflict with SPA-2100.
Solution change your router to give out IP addresses on a different subnet, i.e: 192.168.10.
Alternatively, you can change SPA-2100's LAN IP address also and its DHCP assignment. To connect to the SPA at this state: unplug the WAN connection, and reboot the SPA. Connect your PC to the LAN port, then to connect to »192.168.0.1 and make the above suggested change.
Submitted by keithpetersen
 feedback form
 feedback form
by Macy  |
