|
Home | Reviews | Speed Test | Tools | News | Forums | Info | About | Join |
Contribution of Covenant To work with SIP phones, SCCP phones and a GSM gateway to use a SIP trunk from an ITSP 1.) Allow H.323 to H.323, SIP to SIP and between each other and set the domain for the ITSP. Translation rule to discard the "9" is also setup below: 2.) Setup SIP user agent configuration parameters. 4.) A dial-peer is created as a SIP trunk to the SIP server within voipcheap.com's domain and also to the GSM-VoIP gateway. Contribution of ladino 1) Configure Voice mail via your Provider 2) Configure Outbound CLID 3) CFNA - Voice Mail Inbound calls still just ring and ring until going to a busy signal since there's no voicemail with CME 4) B-ACD Create a Ring Group and Basic Auto Attendant When you call the number you can enter the extension directly or hold on the line for an operator (ring all phones) Cisco CME Basic Automatic Call Distribution and Cisco Unity Express Auto Attendant Interoperation Configuration Example 5) Paging group Contribution of DaSneaky1D SIP Trunk to Analog phone on FXS port using CME Details »SOLVED - SIP Trunk to Analog phone on FXS port using CME Additional Sample Configurations »[Config] CallManager Express / IOS Telephony config »[Info] 2800 as a resedential gateway? »2610 FXS Discussion »Quiet router for home CME »Cisco 2621XM »[HELP] Couple of CME questions. »[voice] unknown number when dialing »[HELP] Callmanager Express can not call or be called after regis »[Config] Voip.ms - Cannot make Outbound Calls [RESOLVED] »[HELP] cisco cme over vpn »voice hunt-group parallel »[Config] CME to CME driving me nuts! »CME9 - soft phones issues »[HELP] Inbound calls to CME not ringing the phones. »[Config] Cisco 2821 w/CME Feedback received on this FAQ entry:
got feedback? by aryoba |