Originally posted here »Re: Speedtouch 516 settings for Teksavvy?

With screenshots
Routed mode: »www.teksavvy.com/en/speedtouchse···=7&mID=2
Bridged mode: »www.teksavvy.com/en/speedtouchse···=7&mID=2

Ontario/Quebec - VPI/VCI=0.35
AB/BC - VPI/VCI=0.33

Connect the modem directly to the PC to configure it.

If you want to connect to the Internet directly through the modem then configure the modem for routing mode. If you want to use a router to connect to the Internet then configure the modem for bridge mode.

Routing mode:
open: »192.168.1.254
click Speedtouch
Click Setup
"Welcome to the easy..." - Next
Routed PPP - Next
Enter select VPI/VCI, PPPoE - Next
Enter username/pass - Next
Skip Admin - Next
Start Config

Bridge Mode:
Connect direct for config then:
open: »192.168.1.254
click Speedtouch
Click Setup
"Welcome to the easy..." - Next
Bridge - Next
Enter select VPI/VCI - Next
Disable DHCP - Next
Skip Admin - Next
Start Config

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by eots edited by fourboxers
last modified: 2008-05-07 11:53:40