how-to block ads
The following instructions allow you to send a Wake-On-Lan (WOL) "Magic Packet" from the internet to a PC on your LAN behind the Actiontec NAT firewall.
From the PC you want to wake:
Unfortunately, the Actiontec firmware (as of version 184.108.40.206.220.127.116.11) ages out its ARP cache. This means that when it receives a WOL packet from the WAN, it may have "forgotten" the IP address associated with the MAC address in the WOL packet. The Actiontec also does not allow creating a port forwarding rule to the LAN broadcast address (192.168.1.255). To get around both of these restrictions, we need to create a static ARP entry in the router that associates an unused IP address (192.168.1.254) with the broadcast MAC address (FF:FF:FF:FF:FF:FF).
Telnet to router:
If you are unable to connect to the router, do the following:
At the prompt, enter either (depends on model of router):
Wireless Broadband Router> shellor:
Wireless Broadband Router> system shell
Note: This static ARP entry will not survive a reboot of the router.
Now login to the Actiontec and Add WAKE-ON-LAN as a port forward protocol in the Actiontec:
Add the Port Forward Rule
SECURITY RISK: This port forward rule should only be enabled when necessary since it will turn any packet received on port 9 into a broadcast packet on your LAN. Recommendation: If the software you are using supports it, I would suggest using an obscure port number, such as 10009, rather than the well known port 9 (security by obscurity).
You can send a WOL packet from here: »/wakeup The DSLReports WOL tool only supports port 9.
If you have trouble, a WOL sniffer can be downloaded here: »www.depicus.com/download.aspx?product=wolm
The above site also has a variety of other WOL tools.
Thanks to zerog for his original post on the subject here: »MI424WR Wake On Lan (WOL) - working hack, needs testing
Revised 12/31/08 to replace DHCP reservation with static ARP.
Please use the feedback link below only to suggest improvements to this FAQ. If you have questions about this FAQ, please post them in the »Verizon FiOS forum.