There are two MOCA interfaces in the Actiontec/Westell routers:

• MOCA WAN is used between the router and the ONT (if your WAN connection is provisioned over coax).
• MOCA LAN is used between the router and the STBs.

A weak MOCA signal can cause connectivity problems.

MOCA speeds

> 200 Mbps	acceptable
180 - 200 Mbps	marginal
< 180 Mbps	unacceptable

To check the MOCA WAN stats:

• On the MAIN status page, click on the blue globe in the My Router column. The System Monitoring page is displayed.
• Click on Broadband Connection (coax). The Broadband Connection (Coax) Properties page is displayed.
• Click on Settings.
• Click on Go to Coax WAN Stats. The WAN Coax Connection Stats page is displayed along with the MOCA speeds between the router and the ONT.

To check the MOCA LAN stats:

• On the MAIN status page, click on the blue globe in the My Router column. The System Monitoring page is displayed.
• In the Network (Home/Office) column, click on coax stats. The Coax Connection Stats page is displayed. This shows the MOCA speeds between the router and all MOCA LAN devices. Speeds should be as listed for MCOA WAN.

Note: Instructions vary slightly for the Westell.

---

Please use the feedback link below only to suggest improvements to this FAQ. If you have questions about this FAQ, please post them in the »Verizon Fiber Optics forum.