+ The 7004BR and 7008BR.
Trigger Port to 7000
Trigger Port to TCP
Public Port 113
Enabled: (remember to check enabled box)
If you are using mIRC go to OPTION, CONNECT, OPTIONS, then type 7000 in the default server box, doing this will allow you to avoid making a lot of port mappings for all the possible server ports.
+ The ABR.
I cannot DCC send or access some other functions of IRC.
Here is the information that we have on IRC.
IRC DCC.
The IRC port is usually 6667, but is sometimes 7000
OUT TCP 6667
or
OUT TCP 7000
IN TCP 113
IRC Chat
OUT TCP 100
IN TCP 101
IRC Fserve
OUT TCP 110
IN TCP 111
IRC IDENT
IN UDP 113
IRC Send
OUT TCP 120
IN TCP 121
IRC Get
OUT TCP 130
IN TCP 131
You need to open the appropriate ports in the router's firewall and you will be able to operate IRC as you usually do. You can put this information in Virtual Server and/or Special Applications. Try setting the above ports (i.e. - 113, 6667, 7000, 120, 130, etc) as Triggers and then set the incoming ports to 6667,7000,100-131. Also, go into Virtual Server and put in 113, 6667, 7000, etc. as Service Ports along with your IP Address (the public ports equal the private ports). Lastly, if you still have problems, try setting the public ports in Special Applications to 1-64535 (note: this opens a WIDE range of ports).
{direct from SMC Networks Web site.}
 feedback form
 feedback form
by Greywolf  |
