First, you need to make sure that your modem is "DMT" (discreet multi-tone) and not "CAP" (carrierless amplitude and phase) modulated. They are not interchangeable.

Second, you need to make sure that it complies with the G.DMT standards. That should be in the documentation.

Third, you'll need to make sure that it's VCI/VPI numbers are right (for Ameritech that's 0/35 for PPPoE, 0/105 for PPPoA) or can be changed to those numbers.

If it meets these conditions, it should work fine even on a linshared installation.

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by RadioDoc edited by lev