Here ya go. This is an Cisco827-V4 running 12.2.2XH2.

Current configuration : 1256 bytes
!
version 12.2
no parser cache
no service single-slot-reload-enable
no service pad
service timestamps debug uptime
service timestamps log uptime
no service password-encryption
!
hostname Router
!
logging rate-limit console 10 except errors
enable password
!
mmi polling-interval 60
no mmi auto-configure
no mmi pvc
mmi snmp-timeout 180
no ip subnet-zero
!
no ip dhcp-client network-discovery
vpdn enable
!
vpdn-group pppoe
request-dialin
protocol pppoe
!
!
!
!
interface Ethernet0
ip address xxx.xxx.xxx.xxx 255.255.255.xxx
ip tcp adjust-mss 1450
no cdp enable
!
interface ATM0
no ip address
no atm ilmi-keepalive
bundle-enable
dsl operating-mode auto
!
interface ATM0.1 point-to-point
pvc 0/35
pppoe-client dial-pool-number 1
!
!
interface Dialer1
ip unnumbered Ethernet0
ip mtu 1492
encapsulation ppp
dialer pool 1
dialer-group 1
no cdp enable
ppp chap hostname
ppp chap password
ppp pap sent-username
!
ip classless
ip route 0.0.0.0 0.0.0.0 Dialer1
no ip http server
!
dialer-list 1 protocol ip permit
no cdp run
!
line con 0
stopbits 1
line vty 0 4
password
login
!
scheduler max-task-time 5000
end

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by RadioDoc edited by lev
last modified: 2006-02-16 17:46:21