Alright, before you can setup the UHP modem you need to set your computer up for DHCP. If you're unsure how to do this, Earthlink already has public web site guides on how to setup DHCP for the following OS's.
---
How to Configure Windows 9x or Me for DHCP -
»kb.earthlink.net/case.asp?article=3067
---
How to Configure Windows NT 4 for DHCP -
»kb.earthlink.net/case.asp?article=3077
---
How to Configure Windows 2000 for DHCP -
»kb.earthlink.net/case.asp?article=3073
---
How to Configure Windows XP for DHCP -
»kb.earthlink.net/case.asp?article=23811
---
How to Configure EarthLink 5 for DHCP (Home Networking) -
»kb.earthlink.net/case.asp?article=3081
---
How to Configure a Macintosh OS 8.6 - 9.22 for DHCP -
»kb.earthlink.net/case.asp?article=639
---
How to Configure a Macintosh OS X 10.0 - 10.2 Network Panel for DHCP
»kb.earthlink.net/case.asp?article=8333
---
FAQ portion above is credited to Doctor Olds 
#1. In the Address or URL field of your browser, type http://172.16.0.254/setup
#2. Press the Enter key on your keyboard.
#3. In the Username field, type your email address.
#4. In the Password field, type your password.
#5. Click the Connect button.
#6. The UHP device will now attempt to connect.
#7. When the PPPoE light on your UHP DSL modem becomes green, close the web browser and open a new web browser window to access the Internet.
 feedback form
 feedback form
by Archivis edited by Doctor Olds
last modified: 2005-12-22 20:05:35 |
