Basically you wire both lines to one jack. Put the "DSL" on the yel/blk contacts and the "phone" on the red/grn. The 2Wire will auto sense the DSL and put the HPNA on the inner pair.

This will create a locked network whereby the splitter serves 2 purposes.

• It will block the DSL from "seeing" any telecom equipment except for the modem • Keep the HPNA signal from progressing out into the Telco cable.

------------------------------------
This info and diagram taken from posts by ADSLGuy

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by KeysCapt