dslreports logo

Basically you wire both lines to one jack. Put the "DSL" on the yel/blk contacts and the "phone" on the red/grn. The 2Wire will auto sense the DSL and put the HPNA on the inner pair.

This will create a locked network whereby the splitter serves 2 purposes.
  1. It will block the DSL from "seeing" any telecom equipment except for the modem
  2. Keep the HPNA signal from progressing out into the Telco cable.




------------------------------------
This info and diagram taken from posts by ADSLGuy


Expand got feedback?

by KeysCapt See Profile
last modified: 2002-12-20 11:10:51