This happens sometimes, Usually because a picture gets framed right after printing it. The ink may be dry to the touch, but it hasn't "Cured" yet. Give an inkjet print at least 24 hrs to cure on the paper, before putting it in a frame.
Also: Using a mat board helps (Matting). A mat board is cut out in the middle to show the picture, but fits into a larger frame.. Mat boards can be 1/8" and thicker, This serves to keep the surface of the print off the glass, and thereby reduce the chance of the image sticking to the inside of the glass..
by Jason edited by Nick
last modified: 2003-01-04 11:03:20