With RASPPPoE, some users find that an MTU of 1492 (commonly used for other PPPoE implementations) is too high.
If this is the case, use DrTCP (Win95/98/98se/ME/2k/XP) to set your MTU to whatever you can ping through within your dial-up adapter.

Also set it to that number in RASPPPoE Properties, after checking "Override Max Transmission Unit."

1) Right click "My Network Places" -> Select "Properties"
2) In the "Network Connections" Window -> Right click "Local Area Connection" -> select "Properties"
3) Click on "PPP over Ethernet Protocol" -> "Properties"
4) Check off "Override Maximum Transfer Unit" and set the value as you need.

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by edited by JMGullett
last modified: 2007-02-26 15:46:25