|
| ||||
 |
|
Home | Reviews | Tools | Forums | FAQs | Find Service | ISP News | Maps | About |
|
how-to block ads |
There are two methods to log into your modem. First way is through telnet. Set your IP on your LAN connection under TCP/IP protocol to 192.168.7.X where X can be any number except 1. The subnet mask is 255.255.255.0 Then use telnet to connect to 192.168.7.1 Like so: Start > Run... > telnet Type "o 192.168.7.1" to connect to modem. Second way is through serial cable. Connect the serial cable to your modem and serial port on your PC. Run HyperTerminal and use these settings: Bits per second: 9600 Data bits: 8 Parity: none Stop bits: 1 Flow control: none
 got feedback?hi
can you help me
i am having problems to upgrade my alcatel firmware
i did do all right but wont install the new upgrade to active
its on passive already but wont install
my modem has firmware KHDSBA.133 TO OLD AND THE NEW BERSION IS 270
I AM HAVING PROBLEMS WITH MY MODEM I USE ADSL 2+ I WANT TO UPGRADE
can you help me please my email is euro.tuga@hotmail.com
THANK YU 2009-03-10 17:38:45 by TilhasBB | |||||
| Saturday, 18-May 10:03:13 | Terms of Use & Privacy | feedback | contact | Hosting by nac.net - DSL,Hosting & Co-lo over 13.5 years online © 1999-2013 dslreports.com. |
