dslreports logo
site
spacer

spacer
 
    «« DSL Hurdles Share Tool
spc

spacer




how-to block ads



Here is a configuration for a uBR924 that was loaded on a unit. It was for use with Optimum Online, but the configuration should be simular (if not the same) for all ISP's assuming they allow you to use a uBR modem...

This router also had a VPN tunnel established, which was removed from the config as well as any personally identifiable information.

The IOS version is 12.2.10b and the boot flash version is also 12.2.10b. The router has been up approx 7 weeks.

!
version 12.2
service nagle
no service pad
service timestamps debug datetime msec
service timestamps log datetime msec
service password-encryption
!
hostname ubr924
!
aaa new-model
enable secret 5
!
clock timezone - -5
clock summer-time EDT recurring
ip subnet-zero
no ip source-route
ip tcp synwait-time 5
ip telnet source-interface Loopback0
ip dhcp excluded-address 192.168.2.1 192.168.2.100
!
ip dhcp pool LOCAL_NET
network 192.168.2.0 255.255.255.0
!the next line will be created automatically
!default-router 192.168.2.1
dns-server
!
ip audit notify log
ip audit po max-events 100
call rsvp-sync
!
!
!
!
!
!
!
!next two lines will be created automatically
!interface Loopback0
! ip address
!
interface Ethernet0
ip address 192.168.2.1 255.255.255.0
ip nat inside
no ip mroute-cache
no cdp enable
!
interface cable-modem0
ip access-group 130 in
ip nat outside
no ip mroute-cache
no cable-modem compliant bridge
cable-modem dhcp-proxy nat PUBLIC
!
ip default-gateway x.x.x.x netmask
ip nat inside source route-map nonat pool PUBLIC overload
ip classless
ip pim bidir-enable
ip http server
ip http cable-monitor advance 192.168.2.1 255.255.255.0
!
access-list 1 permit 192.168.2.0 0.0.0.255 log
access-list 120 permit ip 192.168.2.0 0.0.0.255 any
access-list 130 deny udp any any eq snmp log-input
access-list 130 deny udp any any eq snmptrap log-input
access-list 130 permit ip any any
no cdp run
route-map nonat permit 10
match ip address 120
!
snmp-server packetsize 4096
snmp-server enable traps tty
snmp-server manager
!
!
!
line con 0
line vty 0 4
access-class 1 in
password 7
!
scheduler max-task-time 5000
ntp clock-period 17248359
ntp server 209.81.9.7 source Loopback0
ntp server 63.149.208.5 source Loopback0
ntp server 128.118.25.3 source Loopback0
end

This FAQ provided by N251EA See Profile.

Expand got feedback?

by nozero See Profile edited by aryoba See Profile
last modified: 2005-11-12 08:00:20