Your router is dead after a firmware upgrade that went south or no apparent reason at all. You have tried all the suggestions in the forum, the FAQ and even the 10 year old geek down the street with no luck. There is one more option.

Try this:

1. Disconnect everything

2. Press and hold the reset button for 30 seconds.

3. Un-power the router and leave it powered off for at least 10 seconds

4. Power it back on.

5. If it doesn't work at first, try it again until it does.

Tip provided by Justin

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by jazzman916 edited by Lanik
last modified: 2005-06-22 00:05:04