dslreports logo
site
spacer

spacer
 
    All FAQs Site FAQ DSL FAQ Cable Tech About DSL Distance DSL Hurdles »»
spc

spacer




how-to block ads



Yes. A Version 2 for the 5200 is available for Frontier.net customers.

I have a SpeedStream 5200 with the original version of the firmware. How can I upgrade to the new version of the firmware? (Frontier.net Customers only - Branded Firmware)
quote: Frontiernet.net FAQ
To upgrade to the new SpeedStream 5200 firmware, please contact our 24x7 Technical Support Help Desk at:

(888) 450-8861
NOTE: Archived link if the above link doesn't return to working later:
I have a SpeedStream 5200 with the original version of the firmware. How can I upgrade to the new version of the firmware? (Frontier.net Customers only - Branded Firmware)

Updated FAQ links:

»www.frontierhelp.com/frontiercare/faqs.cfm or »www.frontierhelp.com/faq.cfm

++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++++

I have a SpeedStream 5200 with version 2 of the firmware. How do I configure the ports for games and applications?
quote: Frontiernet.net FAQ
DISCLAIMER: Frontier is not responsible for investigating the appropriate ports to forward for any given application, configuring the modem, or the functionality of applications after port forwarding has been enabled.

1) Using your web browser, launch the router's web management interface located at »192.168.254.254 and login with the appropriate username and password.

2) Click [Setup] on the left-hand side of the page

3) Click [Port Forwarding] on the left-hand side of the page

4) Under Add/Edit entry, select either the service or protocol and TCP/UDP ports, whichever is applicable to your situation. If you select 'protocol and TCP/UDP ports', be sure to enter the appropriate range of port numbers for your situation.

5) Select either 'redirect selected protocol / service to this router' or 'redirect selected protocol / service to IP address', whichever is applicable to your situation. If you select 'redirect selected protocol / service to IP address', be sure to enter the appropriate IP address for your situation.

6) Click 'Apply'


Expand got feedback?

by Doctor Olds See Profile
last modified: 2009-06-09 13:40:04