If you are configuring your router, you want to set the VPI/VCI setting for 0/35 for PPPoE. This is the most common now.

If you are on an old PPPoA setup with an Efficient 3060 PCI modem, you're probably on 0/105. And if you have an ancient straight (bridged) ATM setup with no PPPoAnything, or are using an Alcatel 1000/Efficient 3010 ATM25 NIC, you could be 0/105 or 0/100. Note that the SOHO "routers" like the Linksys, Netgear, etc., will no work on anything but PPPoE or straight Ethernet (cable modem-style).

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by Ranma edited by lev
last modified: 2002-06-14 14:06:33