•Open your browser and type the router's IP (usually 192.168.0.1) in the address field, then login to configure the router (if you have forgotten the password, check the manual on how to reset the router to default username/password).
•Go to Advanced Features.
•Choose Open Ports.
•Choose an available number (NEVER 1 or 2, these are used by the router for specific application configuration).
•Check Enable Open Ports and enter the IP for the computer running DC or click Choose PC to point it out. Continue to enter the correct port number; the port number is the same as the one entered in DC.


•Finally, enter the router's IP address in the DC Settings dialog. This IP is found under 'System Management->Unit Status.' If you have a dynamic IP, you have to change the IP in DC every time the external IP changes.
•If you can search and download files, you have configured it successfully.

FAQ adopted from »www.gangefors.com/adc/DI804/index.html

got feedback?

got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by USR56K edited by JMGullett
last modified: 2007-02-12 13:07:37