republican-creole
site Search:


 
    All FAQs Site FAQ DSL FAQ Cable Tech About DSL Distance DSL Hurdles »»






how-to block ads



Search for: in all FAQs
FAQ RevisionsEditors: nozero See Profile, jonazen See Profile, sashwa See Profile
Last modified on 2008-02-20 17:07:03
view: single page · printable
Table of Contents

1.1 Pre-N

Using the F5D8230-4 as an Access Point applies to version 100x and v200x
This means that you will be converting the F5D8230-4 ROUTER into an Access Point and then connecting the F5D8230-4/AP to another ROUTER that manages your Network WAN/LAN/AP communications

Note: This advanced feature should be employed by advanced users only. The F5D8230-4 Router can be configured to work as a wireless network Access Point. Using this mode will defeat the NAT IP sharing feature and DHCP server. In AP mode, the Router will need to be configured with an IP address that is in the same subnet as the rest of the network that you will bridge to. The default IP address [for the F5D8230-4/AP is] 192.168.2.254 and subnet mask is 255.255.255.0. These can be customized for your need.

1. Enable the AP mode my selecting “Enable” in the “Use as Access Point only” page. When you select this option, you will be able to change the IP settings.
2. Set your IP settings to match your network. Click “Apply Changes”.
3. Connect a cable [category 5e Ethernet cable] from the WAN port on the Router [now acting as an Access Point] to your existing network Router's available LAN port.

The Router is now acting as an Access Point. To access the Router advanced user interface again, type the IP address you specified into your browser’s navigation bar. You can set the encryption settings, MAC address filtering, SSID, and channel normally.

Note:Most of the above information can be found on Page 54 of the F5D8230-4 user manual -- Using the Web-Based Advanced User Interface. The F5D8230-4 user manual contains a wealth of information that is easy to follow and understand.


got feedback?
Hi thank you for writing this info up in the first place, so on to my question... Can the access point be used without the cable? say, as an extender to my wireless setup? Scenario: Netgear DNG2000 in Office, 2 outbuildings, a big willow tree, and leaded windows to the house; the house being approx 40-50ft away. I don't fancy trailing a cable all that way into the house, so, can it be connected wirelessly to the router and used as an access point? TIA Lee

2009-12-22 09:14:18


by mozerd See Profile edited by nozero See Profile
last modified: 2005-10-23 10:13:29

Please read this post by mozerd See Profile »Placement of your Pre-N.

got feedback?

by nozero See Profile edited by sashwa See Profile
last modified: 2008-02-20 17:03:52

See this very informative post by mozerd See Profile »Some important steps for Pre-N

got feedback?

by nozero See Profile edited by sashwa See Profile
last modified: 2008-02-20 17:07:03


Wednesday, 23-May 16:54:07 Terms of Use & Privacy | feedback | contact | Hosting by nac.net - DSL,Hosting & Co-lo
over 12.5 years online © 1999-2012 dslreports.com.