|
3.12 Cayman/Netopia Info·Netopia 3346 User Guides
·What firmware is recommended for the Cayman 3220-H
·How do I configure the Cayman 3220-H modem/router for BellSouth?
·How do I find the line stats on a Cayman 3220-H Ver5.6.2?
·How do I setup a Cayman/Netopia 3346 for BellSouth FastAccess?
·Additional Cayman Info
·Netopia 3347 Screen Shots and Menus
|
| |
Note: Requires Adobe Acrobat Reader.
•Netopia 3346 Installation Guide (January 2003)
•Netopia 3346 BellSouth Business DSL Multi-User Guide
 feedback form
 feedback form
by Andy Houtz  edited by FAQFixer
last modified: 2006-05-31 23:06:44 |
| |
BellSouth and Netopia recommend 6.3.0 R7 or higher for several reasons:
 The newer firmware ensures compatibility with the network protocols used by BellSouth.
The earlier firmware versions contain a character limit in the username so many customers unknowningly run out of space when using the username@bellsouth.net format.
-Netopia Support Note CIR_100
-Netopia Support Note CQG_037 (Updating firmware)
Andy Houtz
feedback form
feedback form
by Andy Houtz
last modified: 2004-01-26 13:40:14 |
| |
To use the Cayman 3220-H DSL modem/router with BellSouth, it must be configured as follows (Note that these instructions are for use with the Cayman's web browser interface, and these configurations are for 5.x firmware only. )•Connect the Cayman to your network and configure your PC's to access the Cayman by following the instructions in the Getting Started with the Cayman 3220-H booklet that came with the router.
•Using the instructions on page 4 of the booklet, http to the Cayman's web browser interface.
•From the Main configuration menu, click Quickstart. On the Quickstart page, enter your BellSouth FastAccess User name and Password in the appropriate fields and click Save.
•Again, from the Main configuration menu, click DSL Port(WAN).
•In the pulldown selection box next to VCC1 on the ATM Configuration page, choose either ppp-llc, ppp-vcmux, pppoe-llc or pppoe-vcmux. Any of these 4 will work with BellSouth. Most users prefer ppp-llc. Next click the Config button next to VCC1.
•On the VCC1 Configuration page, enter the following settings:•VPI : 8
•VCI : 35
•Connection Type : Always On
•Idle Timeout : 300 This setting is actually not used
•PAP : On Enter FastAccess User name and Password in the appropriate boxes.
•CHAP : On Enter FastAccess User name and Password in the appropriate boxes.
•IP Interface : On
•NAT : On
•Local Address : 0.0.0.0
•Peer Address : 0.0.0.0
•Admin Restrictions : Admin-disabled Will prevent access to the router setup from the internet!
•RIP-Send : Off
•RIP-Receive : Off
•IP Gateway : On
•Gateway Type : PPP port(vcc1)
•Gateway Address : 0.0.0.0
•Click Save and reboot the Cayman.
•If using Microsoft Internet Explorer and/or Outlook or Outlook Express, make sure to set both to access the internet via the LAN.
feedback form
feedback form
by leevis edited by Andy Houtz
last modified: 2003-04-21 17:05:53 |
| |
This FAQ is designed for Cayman firmware 5.6.2 only. Use the Cayman Quick Start Guide for instructions on how to log into your Cayman router using Telnet or the console port. Once logged in, click on the DSL link to find the line statistics. The most important information includes:
Maximum Rate
Noise Margin
Attenuation
Out Power
Additional Information: Click here to learn more about line statistics, what is measured, and recommended values.
Andy Houtz
feedback form
feedback form
by Andy Houtz
last modified: 2004-01-28 09:49:05 |
| |
This FAQ is under construction! Thanks for your patience. In the mean time please use the User Guide links below.
•Cayman/Netopia3346 Installation Guide (January 2003).
•Cayman/Netopia 3346 BellSouth Business DSL Multi-User Guide
Pictures by Andy Houtz
Andy Houtz
feedback form
feedback form
by Andy Houtz
last modified: 2003-11-26 08:44:52 |
| |
See the Cayman FAQ on the site for additional help.
feedback form
feedback form
by KeysCapt edited by Andy Houtz
last modified: 2003-04-21 17:06:23 |
| |
This FAQ is still under construction - please pardon our dust!
Andy Houtz
feedback form
feedback form
by FAQFixer |
