• How do I setup the Cayman in Bridge Mode?
• How do I configure an IP Map in the Cayman Router?
• How do I turn off the DHCP Server on the CaymanŽ Series gateway?
• How can I monitor network traffic?

You can follow these instructions outlined by the Netopia website.

Configuring Bridge Mode in the Cayman Router

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by davidg edited by LBB
last modified: 2004-02-10 14:03:26

The instructions for Configuring an IP Map is outlined here at the Netopia Website.

Configuring an IP Map in the Cayman Router

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by LBB
last modified: 2005-01-03 10:50:00

To turn the DHCP server off on the CaymanŽ Series gateway, follow the instructions below:

1. Browse into the CaymanŽ Series gateway.
2. Click on Configure
3. Click on LAN
4. Click DHCP Server
5. Choose OFF from the Server Mode drop down box
6. Click the Yellow Triangle in the upper right-hand corner. Choose Save and Restart.

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by davidg edited by LBB
last modified: 2004-02-10 21:32:29

You can set up MRTG on your Cayman using SNMP. For more information, please see the MRTG section here - »Bandwidth

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by removed