• Where can I get the User Guide or Quick Start Guide for the 4100/4200 Router?
• I have a 4100 from AT&T (Formerly SBC) where is setup info, tips, & help
• How do I change into Bridged Mode on the 4100/4200?

At the Efficient KB Article links below: [Requires the FREE Adobe Acrobat Reader]

SpeedStream 4100 Quick Start Guide [977 KB PDF file]

Siemens 4100 Quick Start Guide [913 KB PDF file]

SpeedStream 4200 Quick Start Guide [1.1 MB PDF file]

Siemens 4200 Quick Start Guide [1.1 MB PDF file]

SpeedStream Router User's Guide Models 4100 and 4200 [2.47 MB PDF file]

Siemens Speedstream 4100/4200 Router User Guide [2.5 MB PDF file]

Siemens Speedstream 4100/4200 Data Sheet [164 KB PDF file]

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by Doctor Olds
last modified: 2007-09-18 22:38:55

The 4100 replaced the 5100. The 4100 uses the same Web Interface as the 5100 and setup is the same as the previous 5100 so it is all here:

»Efficient Networks Forum FAQ »I have a 5100 0r 4100 from AT&T/SBC, where is setup info, tips, & help?

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by Doctor Olds

This is the proper way to set all Speedstream 4100, 4200 plus 5100 and 5200 Router/Modems to Bridge Mode. There is one exception and that is the Windstream "Walled Garden" 4200 (Formerly Alltel, Valor 4200 with 2008 Walled Garden Firmware) read the Windstream FAQ for details.

Thanks to the Sympatico Forum FAQ:

»Bell Canada Internet FAQ »How do I change into bridged mode on the 4200?

quote:

---

This modem does not have an explicit option to switch to bridge mode. Instead, it automatically detects what method you're trying to use.

1. With the modem on, simply press and hold the reset button for four seconds (until the Pwr LED starts to blink alternating between red and green) to clear the user name and password from the modem.

2. If you are not using a Router, then create a new connection as described here for Windows XP or use RASPPPoE with Windows 9x/ME/2000.

3. If you are using a Router, connect the Router between your computer and the modem and configure the Router with your Username and Password.

by MacGyver
last modified: 2007-09-14 21:34:22

---

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by Doctor Olds
last modified: 2008-12-25 12:12:32