dslreports logo
site
spacer

spacer
 
    All FAQs Site FAQ DSL FAQ Cable Tech About DSL Distance DSL Hurdles »»
spc

spacer




how-to block ads




1. Introduction

The Insight Forum Line Monitor Section provides an easily accessible, reliable, independent indication of the actual performance of member's connections by comparing the line conditions of fellow Insight Forum members from your area.
Members Sign up for basic line monitoring here at Broadband Reports. We then we use that information to generate graphs that show your line's stats along with others from your state. A very important factor is the way you setup the account. Even if you have a static IP, you must create the account as a dynamic IP. For security and privacy, BBR uses a cookie feature so that if you are logged in, only you can see your static IP graph. But for those that are not logged in, the graph is not visible, it will appear broken. So setting the graph to a dynamic IP will allow everyone to see the graph while the IP will remain hidden. If you have a static IP you do not need to run a DDNS client. Just set the monitor for "dynamic" and then type in your IP address in the "monitor this static address" box.

Click on the individual graphs to display more detailed information for that contributor's connection.

Click Here to Join Today!



The Insight/BBR Line Monitor is for informational purposes only and does not in any way replace official status reports or support from your ISP.

by Macy See Profile
last modified: 2006-11-10 11:31:22

It begins with the BBR Line Monitoring Service. It pings your DSL line, to see how long it takes to reach you from their server and return. This provides a lot of helpful information. The ping is graphed in milliseconds, over a series of graphs, in hours, days weeks, and months. A slow ping can mean DNS problems, backbone routing issues, or a problem on your end. Getting no response at all can mean an area wide outage, or an outage with your DSL line.

The BBR Line Monitoring Service can help us identify and single out the problems, since your ISP's site or customer support may not be aware of the issue. It is much easier to check the status page then to wait on hold or fish through an ISPs website.



So what do I need?
1. A connection that is on 24/7, since that is the most effective way to monitor a connection. Those with Cable/DSL routers can take advantage of this easily, leaving the router on to be monitored. Those with out routers will need to leave their PCs running at all times, staying connected through PPPoE software. See this FAQ regarding whether you will need to keep your PC on 24/7.

2. A BBR Line Monitoring Service Account . The service costs 1 Tool Point (approximately $1 per week). The first week is free. After the first week, you'll need to acquire Tool Points to continue participating. Your monitor will be terminated after the first week if you do not buy tool points.


A very important factor is the way you setup the account. Even if you have a static IP, you must create the account as a dynamic IP. You have to check the dynamic box and enter your static IP. For security and privacy, BBR uses a cookie feature so that if you are logged in, only you can see your static IP graph. But for those that are not logged in, the graph is not visible, it will appear broken. So setting the graph to a dynamic IP will allow everyone to see the graph while the IP will remain hidden. If you have a static IP you do not need to run a DDNS client. Just set the monitor for "dynamic" and then type in your IP address in the "monitor this static address" box.
Click for full size


3. The next step is to sign up. Send an Instant Message to lilhurricane See Profile with the following information:

Your Username
City/State
ISP Name
Connection Type (Cable, DSL, etc)
Line type (static/dynamic)
Line Speed
Monitor Number (see example below)
Setup (modem/router)

Click for full size



The Insight/BBR Line Monitor is for informational purposes only and does not in any way replace official status reports or support from your ISP.

by Macy See Profile
last modified: 2007-05-22 14:18:02

If you no longer have toolpoints, your graph will indicate that there is no data to draw a graph like this:

Click for full size


In order to resume your monitoring, you will need to visit the toolpoints store to buy more points and restart monitoring services. If you choose to no longer participate, please IM Macy See Profile so that you can be removed from the Insight Line Monitoring section.

The Insight/BBR Line Monitor is for informational purposes only and does not in any way replace official status reports or support from your ISP.

by Macy See Profile
last modified: 2006-12-06 18:53:36