|
1.4 Official Help·Firmware, Betas and released and more
·Where can I get officially released firmware for Linksys products?
·How do I get Linksys official setup help
·A Suggestion for successful firmware update
·Ports List
|
| |
Current firmware is best obtained via the main LinkSys site at: www.linksys.com
 feedback form
 feedback form
by lev  edited by sortofageek
last modified: 2009-10-21 23:19:42 |
| |
BEFW11S4 : »www.linksys.com/download/firmwar···?fwid=17
BEFSR11 : »www.linksys.com/download/firmware.asp?fwid=1
BEFSR81 : »www.linksys.com/download/firmware.asp?fwid=5
BEFSR41 : »www.linksys.com/download/firmware.asp?fwid=3
BEFW11P1 : »www.linksys.com/download/firmwar···?fwid=18
BEFVP41 : »www.linksys.com/download/firmwar···fwid=158
BEFSRU31 : »www.linksys.com/download/firmware.asp?fwid=8
BEFN2PS4 : »www.linksys.com/download/firmwar···?fwid=12
WAP11 : »www.linksys.com/download/firmwar···?fwid=11
BEFSR41 VERSION 3 : »www.linksys.com/download/firmwar···fwid=183
feedback form
feedback form
by evansc edited by Lanik
last modified: 2005-06-22 00:20:01 |
| |
The Official Linksys Setup Helper page can walk you through the basics of identifying connections and getting everything hooked up.
feedback form
feedback form
by lev edited by Lanik
last modified: 2005-08-22 11:24:14 |
| |
If you're about to update the firmware for your LinkSys BEFSR41, here is a brief description of the procedure, with a suggestion that was learned the hard way, and may save you some hassles:
First, download the update from the LinkSys site. Unzip the downloaded file to a folder of your choice ... /linksys for example. The unzipped files include a .pdf instruction file, which will tell you how to proceed.
Important: This is NOT mentioned in the .pdf file, but it is strongly suggested that you remove all connections from your LinkSys BEFSR41 except the one for the computer you will be using!
Next, click on the TFTP.exe file in the folder you created. Enter your password (admin if you haven't changed it), use the browse feature to navigate to the same folder, and find the code.bin file there. Then, click on "upgrade". You should see a progress bar, then the message that you have successfully upgraded your BEFSR41.
Not removing the other connections from the router can cause a corrupted firmware, and the dreaded flashing diag light. To recover from this, you will have to follow the process outlined in this FAQ entry, although it may not be necessary to follow the portion that involves your NIC.
feedback form
feedback form
by KeysCapt edited by Lanik
last modified: 2005-06-22 00:22:01 |
| |
»Practically Networked Web Site Links
feedback form
feedback form
by lev edited by Lanik
last modified: 2005-06-22 00:21:29 |
