• How to do I setup the RV082 to different VPN Endpoints?
• Why are my cable speeds so much slower after connecting the RV042 router?

For many useful answers check out these extensive tutorials: »www.linksysinfo.co.uk/routerworld/main.htm

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by hanoirocks edited by Lanik
last modified: 2006-06-26 16:16:43

Cable connections in particular seem to be reduced to a crawl -- 500-700kb/s as compared to the 4000kb/s seen without the router. The suggestions below may also apply to the other RV0x2 routers.

First, try switching the MTU in the router from "Auto" to "Manual" but leave the MTU value at 1500 (in the Firewall tab).

If that doesn't help, then try each of these values, one at at time:

1492
1460
1400
1360
1300

My ideal turned out to be 1360. For other routers in the RV0x2 family, check the online manuals at Linksys to verify these values but I would expect them to be the same.

Finally, make sure you have re-tweaked. Even though you may have gotten excellent speeds previously, I found that adjusting the RWIN per the tweak test results with this router in place got my speeds all the way up to expected results.

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by darcilicious edited by Lanik
last modified: 2005-07-14 13:50:22