• How can I contact Speakeasy?
• Where can I find Speakeasy's TOS (Terms of Service)?
• Where can I find SpeakEasy User Manuls?
• What is the config for a Cisco WIC-1ADSL

Speakeasy's contact info is as follows:

Mailing Address:
Speakeasy
2222 2nd Avenue
Seattle, WA 98121

Phone:
Toll Free: 800.556.5829
Local Seattle: 206.728.9770
Fax: 206.728.1500

Payment Remittance:
Speakeasy Broadband Services, LLC
P.O. Box 34938
Seattle, WA 98124-1938

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by borborpa

Speakeasy's TOS is available at »speakeasy.net/tos

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by Eagle 1 edited by borborpa
last modified: 2004-05-12 07:28:56

Speakeasy User Manuals are available online at:

HTML: »www.speakeasy.net/myspeak/userma···_v2.html
PDF: »www.speakeasy.net/myspeak/userma···n_v2.pdf
DOC: »www.speakeasy.net/myspeak/userma···n_v2.doc

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by Eagle 1 edited by borborpa
last modified: 2004-05-12 07:29:48

I did not see this information posted anywhere in the Speakeasy Forum so I thought I would contribute... If this information is already known, sorry for the useless post.

This is a config that I wrote last night for the WIC-1ADSL card running on Speakeasy with static services. The IOS version on the 2621XM is 12.3.10, Enterprise Basic.

If you have any questions, please let me know.

_________________________________________

bridge irb
!
interface FastEthernet[#/#]
[Inside IP Address] [subnet]
ip nat inside
!
interface ATM[#/#]
no ip address
no atm ilmi-keepalive
bundle-enable
dsl operating-mode auto
no clns route-cache
bridge-group [#]
hold-queue 224 in
pvc 0/35
encapsulation aal5snap
!
!
interface BVI[#]
ip address [Primary IP Address] [subnet]
ip address [Additional IP Address] [subnet] secondary
ip address [Additional IP Address] [subnet] secondary
ip address [Additional IP Address] [subnet] secondary
ip nat outside
!
ip nat inside source list [#] interface BVI[#] overload
!
ip route 0.0.0.0 0.0.0.0 BVI[#]
!
access-list [#] permit [Inside IP Addresses][Wild-Card Mask]
!
bridge [#] protocol ieee
!
bridge [#] route ip
!

[Thank you NetEngineer9 for contributing this.]

got feedback? got feedback?

Any feedback you provide is sent to the owner of this FAQ for possible incorporation and shown publically as well.

by borborpa