republican-creole
Search:  

 
 
   All FAQsSite FAQDSL FAQCable TechAbout DSLDistanceCLECSDSL Hurdles»»






how-to block ads



Search for: in all FAQs
FAQ RevisionsEditors: state See Profile, R0CKY See Profile, fourboxers See Profile
Last modified on 2008-11-13 16:29:11
view: single page · printable

5 Hardware

·Modems TSI sells...
·How do I configure my ST516 modem
We have currently had the best success with the following Thomson products:

SpeedTouch 516
- Standard Single port modem
- Has DHCP capabilities with basic router functions

SpeedTouch 546
- 4 port modem
- Has DHCP capabilities with basic router functions

SpeedTouch 780
- 4 port modem
- Wireless Capabilities
- Is a VOIP Gateway
- Has DHCP capabilities with basic router functions

feedback form

by R0CKY See Profile

Originally posted here »Re: Speedtouch 516 settings for Teksavvy?

With screenshots
Routed mode: »www.teksavvy.com/en/speedtouchse···=7&mID=2
Bridged mode: »www.teksavvy.com/en/speedtouchse···=7&mID=2

Ontario/Quebec - VPI/VCI=0.35
AB/BC - VPI/VCI=0.33

Connect the modem directly to the PC to configure it.

If you want to connect to the Internet directly through the modem then configure the modem for routing mode. If you want to use a router to connect to the Internet then configure the modem for bridge mode.

Routing mode:
open: »192.168.1.254
click Speedtouch
Click Setup
"Welcome to the easy..." - Next
Routed PPP - Next
Enter select VPI/VCI, PPPoE - Next
Enter username/pass - Next
Skip Admin - Next
Start Config

Bridge Mode:
Connect direct for config then:
open: »192.168.1.254
click Speedtouch
Click Setup
"Welcome to the easy..." - Next
Bridge - Next
Enter select VPI/VCI - Next
Disable DHCP - Next
Skip Admin - Next
Start Config

feedback form

by eots See Profile edited by fourboxers See Profile
last modified: 2008-05-07 11:53:40



Friday, 21-Nov 07:07:14 Terms of Use | Privacy Policy | Hosting by www.nac.net - DSL,Hosting & Co-lo | feedback | contact
over 9 years online! © 1999-2008 dslreports.com.