|
2.0 Troubleshooting·Apple Remote Desktop Admin cannot communicate with clients
·How can I collect statistical information from Westell modems?
·How can I deal with the Verizon walled garden?
|
| |
If you are running ARD from behind a Westell 6100 using the built-in router, you may find that all your clients show up only as "Offline" or "VNC On." The solution is to bring up the Westell configuration web page, click on the NAT/Gaming tab, and define a new custom service. I chose to make it a port triggering service to increase security. Set the trigger and global ports to 3283. Save this service, enable it, and you should have full control of your clients again.
 feedback form
 feedback form
by alexiskai  edited by Riss_Centaur
last modified: 2006-09-18 14:05:02 |
| |
ADSL Monitor now supports Westell modems: »adslm.dohrenburg.net
ADSL Monitor multicast version collects statistical data using Westell multicasting streams. ADSL Monitor should work with any Westell modem using this data gathering technique.
Download the full installation package from: »adslm.dohrenburg.net/Multicast_A···itor.zip or visit the ADSL Monitor home page for detailed instructions and updates.
feedback form
feedback form
by starstuff edited by drake
last modified: 2005-02-16 18:48:43 |
| |
Some verizon versions of the Westell modems (6100, 327w, 7500) come with firmware that directs you to a walled garden, from which it is hard to escape.
If you are on Verizon, this might not be a problem. The purpose of the walled garden is to help you configure your modem. However, if you are using a verizon version of the modem with another provider, then the walled garden arrangement prevents you from getting to the modem configuration pages.
To turn off the walled garden, follow the advice in the Verizon FAQ:
»Verizon Online DSL FAQ »How to Turn off the Walled Garden
feedback form
feedback form
by nwrickert edited by sashwa
last modified: 2009-10-01 20:08:39 |
