Launch your internet browser, and type in the address bar: »192.168.1.1 - this should bring you to the configuration page for your VersaLink 327w model.

Note: you may be prompt for user name and password on specific pages within the modem. The default user name is: admin; the default password is: password. However, with Verizon subscribers, if the above does not work, try entering your Verizon's user name and password.

The factory default is:

username: admin
password: password

As seen here: »Defalt password for westell versalink 327W

See also: »Westell Equipment Forum FAQ »How can I access my VersaLink configuration page?

After many hours of trial and error to accomplish what should be a simple task of putting a device into the DMZ zone I came upon this easy solution. Login in to the router. Click on configuration and then single static IP. Choose the IP of the device you want to enter into the DMZ. Such as a PC, VOIP device, etc. Click enable on the bottom. While the router is rebooting, check that the device is setup for DHCP. After router reboots, reboot the device and your done.

Various threads on this subject:
»[modem/router] Versalink router DMZ
»Versalink 327

- bilbo4fun