<?xml version="1.0" encoding="UTF-8"?>

<rss version="2.0" xmlns:blogChannel="http://backend.userland.com/blogChannelModule">

<channel>
<title>Audio/Video Chat forum - dslreports.com community</title>
<link>http://www.dslreports.com/forum/audiovideo</link>
<description>Audio/Video Chat forum current topics</description>
<language>en</language>
<copyright>Copyright 2007, dslreports.com</copyright>
<pubDate>Sun, 08 Nov 2009 08:37:15 EDT</pubDate>
<lastBuildDate>Sun, 08 Nov 2009 08:37:15 EDT</lastBuildDate>

<image>
<title>dslreports.com</title>
<url>http://i.dslr.net/bbrdisc1.gif</url>
<link>http://www.dslreports.com</link>
<width>19</width>
<height>18</height>
<description>bbr disc</description>
</image>

<item>
<title>Netflix on PS/3</title>
<link>http://www.dslreports.com/forum/remark,23296534</link>
<description><![CDATA[Woohoo!

Got an email from Netflix while I was at lunch.  "For Fri: Streaming Disc for PS/3".

Know what I'm doing this weekend!]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/remark,23296534</guid>
<pubDate>2009-11-05 13:17:27</pubDate>
</item>

<item>
<title>HTPCs and ATI DCT cableCARD setup</title>
<link>http://www.dslreports.com/forum/remark,23306426</link>
<description><![CDATA[So rather than further hijacking this thread: http://www.dslreports.com/forum/r23304733-MCE-Digital-Cable-Advisor-Tool-Available-Now I decided that I should just start my own thread here.

So my next question is, do you have to have 1 DCT and cableCARD for each tuner, say I want to be able to record 2-4 shows at the same time? Or is it more dependent on the cableCARD, for instance s-cards vs. m-cards, vs. ??
--
Rule #62: Don't take yourself so damn seriously!]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/remark,23306426</guid>
<pubDate>2009-11-07 13:25:34</pubDate>
</item>

<item>
<title>[Tip] Automatically split an audio track with Audacity</title>
<link>http://www.dslreports.com/forum/remark,23304391</link>
<description><![CDATA[Today's my day off work and due to my recklessness I broke my desktop computer's installation, leaving me with much boredom, some free time, and my trusty laptop. What I normally do is download a bunch of podcast episodes off of the Internet (.mp3 format), and then burn them to a CD-RW as a data disc. Since my car has a built-in MP3 player, I can simply pop in the disc and select which episode (.mp3 file) I wish to listen to. There is a problem, however. Seeking within an episode takes forever, since I have to hold down the seek-forward button. This can take a very long time for lengthy episodes (such as those over an hour!) Imagine the feeling when you eject the disc and then wish to resume at a later time, only to realize you need to hold down the seek-forward button for another minute or so.

So, I decided to play around with Audacity, and I discovered this extremely useful, yet much overlooked and simple solution. Introduced with Audacity version 1.3.x is a feature that allows you to automatically split an audio track every X number of seconds (or even splitting the track X number of times, based on its length.)

Now I am able "seek" to a certain part in the podcast episode by using the "next track" button in my car's CD player. For example, if I split a 60-minute audio track into 2 minute intervals, I am essentially able to "seek" within the episode every 2 minutes. (Part 0 starts at the 0:00:00 mark, part 1 starts at the 0:02:00 mark, part 2 starts at the 0:04:00 mark, and so on.)

Here is how it's done. Best of all, it's very simple and quick! (Make sure you have at least version 1.3.x of Audacity.)

1.) Launch Audacity. (Consult your system administrator, for this is a very difficult step and could possibly result in data loss, the CPU overheating, or a region-wide black out).

2.) Go to File > Open and browse for and select the audio file. (In my example, I am using a 20-minute podcast. It may take a while to import a large file.)

3.) Go to Analyze > Regular Interval Labels.

4.) Choose "Label interval" for "Label placement method" and then enter the interval (in seconds) for how the audio track should be split into separate files. (Or you may split with a specified number of files by selecting the "Number of labels" method and then entering the number of desired files/splits.) Make sure "Include final label" is set to "No". It does not matter what name you enter for the labels, as you will see why later on. After clicking "Okay", you will notice a bunch of label indicators underneath the audio track.

5.) Go to File > Export Multiple.

6.) Choose the "Export format" and configure it. (In my case, I use MP3, 128 kbps CBR).

7.) Choose "Labels" under "Split files based on". (Do not check "Include audio before first label".) Choose "Numbering consecutively" under "Name files" and type in a name that will be used for the .mp3 files.

8.) Click "Export".

9.) This next part I hate. You have to keep clicking "Okay" for every single audio track, since it wants you to enter tag information for every single file! (I found no way to skip this part and go straight to the exporting process.)

A.) Because 10.) would ruin the alignment on the left-hand side of this post.

B.) As it is exporting, it will keep popping up a different window for each separate file. Just let Audacity do its thing and try not to accidentally cancel the process. This can take a while, depending on the file size and track length of the original source.

C.) Browse to the folder where you saved the files to. You should see a bunch of files numbered sequentially and named according to your prior settings.

D.) Finally, just use you favorite disc burning application and burn the .mp3 files as a data CD. Make sure they are in the correct order before burning.

That's it! Enjoy your easy-to-seek podcast episodes on your CD-RW disc while driving in your car! This tip goes out to all of you! (Yes, all of you: all three of you who actually listen to podcasts with your car's CD player...)

* The drawback to this method is that it re-compresses the audio files, meaning you will get some quality loss, although it is not very noticeable. You might also hear a quick "skip" as it transitions from one track to the next. This should work with Audacity 1.3.x and greater on Windows, Mac, and Linux. If anyone knows of another cross-platform method (preferably quicker and/or does not require re-compression), please do share!

** Yes, I do know about mp3DirectCut, but this is a Windows-only application (unless you use Wine.) I have also heard about using cue sheets, but I think they only work with audio CDs, and not MP3 data CDs.

*** And before I even submitted this post, I found out about mp3splt-gtk, which is a cross-platform program (Windows, Mac, Linux) that is equivalent to mp3DirectCut! Might be something worth looking into, since it appears simple and straight-forward enough.]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/remark,23304391</guid>
<pubDate>2009-11-06 21:20:38</pubDate>
</item>

<item>
<title>Cable TV causing trouble with audio?</title>
<link>http://www.dslreports.com/forum/remark,22919419</link>
<description><![CDATA[I recently setup a home theater in one room in the house.  My computer desk is in the same room and I just got the needed cables to hook up my 32-inch HDTV to the computer as a secondary monitor using a DVI/HDMI cable.  I also hooked up the audio output to the home theater and I immediately got this horrible ground hum noise.  This was either on the computer speakers or on the home theater speakers, depending on the connections I made.  After some experimenting I narrowed down the source to the cable TV drop coming from outside.  If I disconnect the cable coming from the outside at any point (splitter inside house or the cable between the converter box and the TV) the hum will stop completely.

I find it odd that even if the cable is "disconnected" via a switch I have to allow switching between cable TV and the rooftop antenna the hum will be there.  Even if the switch is set to "Antenna".  The switch is hooked up as labeled.

When I was setting up the home theater I wanted to connect the audio output from the cable box into the receiver and had the same problem.  I blamed it to a faulty cable box and decided to get the audio from the TV audio output instead.  Now I get this problem in a seemingly unrelated component (the computer) and it appears to be the cable TV drop.

I do know that the drop does not have a grounding block anywhere.  Could this be the reason?  Should I call the cable guy to have this fixed?]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/remark,22919419</guid>
<pubDate>2009-08-25 00:46:25</pubDate>
</item>

<item>
<title>[Help] Difference between burning audio and backing up?</title>
<link>http://www.dslreports.com/forum/remark,23256671</link>
<description><![CDATA[I'm looking for a CD/DVD burning software for Windows 7, 64-bit. 

I just need something basic, where it lets me back up all of my files (music, data, Word files, pictures, images, documents, etc) and lets me make (duplicate) copies of CD's/DVD's.

It seems that Nero 9 FREE is a basic program that may fit my needs, but it says it doesn't allow audio burning.

What is the difference between audio burning and backing up music/audio? I have a lot of songs already on my computer that I wanted to back up with all of my other files, so I preserve the music.

Is there a distinct difference between backing up music/audio and burning music/audio? 

I'm just trying to find the best, basic software for me, and lightweight would be great, too.

Thanks so much!!]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/remark,23256671</guid>
<pubDate>2009-10-28 18:43:40</pubDate>
</item>

<item>
<title>Internet PC Set Top box for internet access to HD TV</title>
<link>http://www.dslreports.com/forum/remark,23276216</link>
<description><![CDATA[I just got a large HD TV and will be looking to getting internet content on it. The obvious way to do it is to attach a standard PC/MAC to it and use it as a 19xx X 1080 monitor. On the other hand:

  1) What are the specs that I need for this system so that I can 
 
.  Browse the web,
.   Playback DVD's, or BlueRay's, 
.  Play Flash, NetFlix, Joost, Hulu ...
.  Have reasonable life, 
...   and what ever I might need?

I obviously want a small, quiet, cheap, system, AppleTV?, MacMini?, DYO Silent PC?, Atom powered NetBook?, Older PC?..., running MacOS?, Windows XP?, LINUX?... 

 .   CPU Speed, Memory ...?
 .   OS that can playback the proper formats?
  .  Other specs?

  2) Is there any reasonable expectation that either the Sony KDL-46w5100 or the Motorola DCX-3400 (from ComCast) will be "upgraded" at a reasonable cost to support the InterNet or just as bundled services? or perhaps one of the other set-top boxes is better than a PC.

   3) Any other thoughts as to how best to drive the High Definition TV to surf and show InterNet content?]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/remark,23276216</guid>
<pubDate>2009-11-01 21:31:12</pubDate>
</item>

<item>
<title>Camera that will record 90 mins of video on single charge?</title>
<link>http://www.dslreports.com/forum/remark,23304227</link>
<description><![CDATA[I'm looking for a digital camera that will record at least 90 minutes of video on a single charge and be of at least the quality in the video below in the price range of $300 or less. I do have the following, but can't find any info on how much video they will record: Canon SX100 IS and Canon SD1000. Any suggestions? Thanks.

http://www.youtube.com/watch?v=aiV46i9WYv0
--
http://www.dslreports.com/forum/r22511483-Check-this-out!]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/remark,23304227</guid>
<pubDate>2009-11-06 20:41:21</pubDate>
</item>

<item>
<title>DVD/Blu-Ray have low volume</title>
<link>http://www.dslreports.com/forum/remark,23298134</link>
<description><![CDATA[I have a Vizio (VO32LFHDTV10A) and used to have a standard DVD player hooked up to it...The audio was really low so I had to turn the volume up to like 30 but then when I had the volume at 30 the action would be insanely loud so I'd have to turn it down again then up again when people started talking...The same thing happens with my Blu-Ray player...

The same thing happened when I tested out my old Playstation with an audio CD, I had to crank the volume just to hear the music decently

The Blu-Ray player is hooked up via HDMI, I've reset the audio configs on the TV, Messed with the settings (as recommended by the Vizio email I got) and everything sounds the same no matter what settings...

What causes that? Do I need to buy a sound system? Just for the record TV stations sound fine at a reasonable volume of 10-15]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/remark,23298134</guid>
<pubDate>2009-11-05 18:24:00</pubDate>
</item>

<item>
<title>Network medial player for HD TV</title>
<link>http://www.dslreports.com/forum/remark,23299228</link>
<description><![CDATA[Any suggestions for a set top box to stream my media from my NAS to and HD tv? Other then my existing MP3 & AAC song files, and my JPG images, I am not restricted on the Movie format.

I found this that seams popular and inexpensive. The remote sucks but otherwise looks solid:
WD TV Live HD http://wdc.com/en/products/Products.asp?DriveID=735

Any opinions out there?
Peter]]></description>
<guid isPermaLink="true">http://www.dslreports.com/forum/remark,23299228</guid>
<pubDate>2009-11-05 22:07:24</pubDate>
</item>

</channel>
</rss>
