| reply to eranros
Re: New problem - No WAN connection - update said by eranros:
...Please post your experience - has the DHCP been fixed? Do you get a proper renewal of the lease at the 50% mark?
3 proper renewals of the lease at the 50% mark, over the last 12 hrs. I never powered down the router; router is on UPS. Flashed "live" without manual resetting or powering down. No change in WAN IP address. |
|
| reply to submariner
I tried 1.46 fw after experiencing problems with 1.45-7 and 1.45-11 - oddly enough all my settings were retained. But I am still having the DHCP problem. My internet connection became dead in the water only 7 minutes after I upgraded. When I looked at the router's status my WAN ip was 0.0.0.0. |
|
| reply to RUdude0884a
lol, OK ENOUGH problem Postings, More solutions!! Can ppl Pleeeeeeze stop posting the problems their havin with their router if its already been discussed by sum1 else...
DOes anyyyyybuddy hav solutions from here on?
noooooo more problems.. theyve all been addressed 20 times over... solutionzzzz pleeze from now on
 :D:D
does anyone know where i can get older firmware??
its sumthin to try i guess |
|
| Version 1.46 has just been released, but they only addressed the DHCP renewal issues and didn't touch the disconnection issues people were experiencing with 1.45.11. |
|
| reply to Bo Jangles
said by Bo Jangles:
...does anyone know where i can get older firmware??...
Version 1.45.7
»ftp://ftp.linksys.com/pub/befsr41/befs···1457.zip
Version 1.45.6
»ftp://ftp.linksys.com/pub/befsr41/befs···1456.zip |
|
| reply to RUdude0884a
Re: Firmware 1.45.11 for BEFSR41 (v1 and v2) hey thanks so muchhh... b4 i download.. which one shud i get.. which is the most stable?? |
|
|
|
| reply to Comp Cmndo
Re: New problem - No WAN connection - update Well, I'm glad to report that so far the problem hasn't recurred. I did notice, that the DHCP lease renews after 75% instead of the previous 50% - but that's acceptable.
Let's hope for the best... |
|
| reply to RUdude0884a
Re: Firmware 1.45.11 for BEFSR41 (v1 and v2) Linksys has released v 1.46 which fixes the DHCP problem. |
|
 ronsega
join:2000-01-03
Chula Vista, CA
1 edit | reply to Sharingan
Which version did you guys downgrade too for it to work with CS/CZ/HL/etc?
The 1.46 version does the same (disconnects with that host error message in the CZ console). So I wouldn't recommend on upgrading to 1.46 just yet. |
|
 scarneyBbr Team Discovery - Bbr Team Rc5Premium
join:2001-02-18
Madison, WI | said by ronsega:
Which version did you guys downgrade too for it to work with CS/CZ/HL/etc?
The 1.46 version does the same (disconnects with that host error message in the CZ console). So I wouldn't recommend on upgrading to 1.46 just yet.
just a temp fix this guy figured out..
»[general] CounterStrike Stream Linksys Fix |
|
| reply to eranros
Re: Firmware 1.45.11 DHCP lease Workaround(s) Linksys has just put out a new firmware update to fix the DHCP renew problem version 1.46
»www.linksys.com/download/firmware.asp?fwid=3 |
|
| reply to scarney
Re: Firmware 1.45.11 for BEFSR41 (v1 and v2) hi, sorry i'm a bit new, but which file should I download to get the downgrade? |
|
| reply to RUdude0884a
I've got 1.46.00 flashed, and I've got 2 terminals connected to this router (Port 3 & 4). I'm not sure if it's my ISP or the router that's dropping me from the Internet, but everytime after the PC connected to port 4 shuts, down, the red DIAG light comes on, and I'm dropped from the internet.
Can anybody advise me on what this problem might be? |
|
| reply to RUdude0884a
I'm having the same problem. I think the red diag light flashing on means the router is rebooting itself. I wish Linksys would come out with an updated firmware that does not cause the router to reboot or lock up. |
|
| reply to RUdude0884a
My DIAG light just comes on solid after like 3 hours of reconnecting, at night. In the day, this doesn't happen when I'm using it.
I would like to know from you guys is that when your ISP is renewing your IP, does the red DIAG light come on?
Also, when this DIAG problem occurs, power cycling the modem is useless; I need to power cycle my modem as well. Is it my modem that's the problem here, or is it the router? |
|
| reply to RUdude0884a
I have a Linksys BEFSR41 v2 router. I would like to know how I can moddify the firmware. I do a great deal of programming for my day job, and I would like to put in various features, I desire, like a bandwidth meter.
Any Thoughts?
Thanks in advance |
|
| Wow that's very ambitious of you, but it is a very good idea nonetheless. I wouldn't know how to do it, let alone start.
But if I manage to find any information with regards to this, I'll drop you a message.  |
|
| reply to Sharingan
With the newer firmware update for our linksys router our internet died twice as much and now we must stick with the older update which sux cuz now i get those UserMsg: Not Present on Client errors so eithr bad internet or no cs? lose lose situation |
|
 hqh510
join:2001-03-24
Manassas, VA | reply to auguur
It's too bad that the BEFSR41 is not like the WRT54G/WRT54GS, because Linksys will not release anything to develop. It's retarded to see that the community can do much better than corporate programmers (read: modified firmwares on WRT54G/WRT54GS).
I'd like to see Linksys release a SDK for the BEFSR41 router, but that won't happen. I'm pretty sure they don't want us to transform their sub $50 router into a $500+ router like what's happening with the WRT54G/WRT54GS.
said by auguur:
I have a Linksys BEFSR41 v2 router. I would like to know how I can moddify the firmware. I do a great deal of programming for my day job, and I would like to put in various features, I desire, like a bandwidth meter.
Any Thoughts?
Thanks in advance
--
HQH
===
My website; Ultimate Rebate Tracker; DLink DI-624,DWL-G520,DWL-G650 Super G Performances; BEFSR41 Setup Guide:»www.geocities.com/hqh51/ |
|
 cow116Cisco KidPremium
join:2003-03-10
Indianapolis, IN | reply to RUdude0884a
could u use the sdk for the wrt54g routers and modify the gpl stuff for the befsr** series routers? or that wont work?
--
Cow_Killa-Online AliasMootilator5000mk3-Computer Alias |
|
