http://www.dslreports.com/forum/r10478250 en Wed, 02 Dec 2009 10:12:48 EDT Wed, 02 Dec 2009 10:12:48 EDT http://www.dslreports.com/forum/remark,10503036 dgilbert : ppp-llc IS ppoe. it is just the older cayman terminology.

and you can download the file thru another connection, then upload it to the cayman. your PID is also listed on the bottom label. goto »www.netopia.com/en-us/equipment/···man.html and choose your PID. if you do not have a PID, use the first set. remember to get both the updater and the firmware, then run the updater first.]]> http://www.dslreports.com/forum/remark,10503036 Sun, 13 Jun 2004 23:31:00 EDT http://www.dslreports.com/forum/remark,10500927 sonettech : looks like I am running firmware 2.5 with no pid. I cannot do the upgrade because I have no internet connection, because the modem does not have ppoe on it. Any other sugestions]]> http://www.dslreports.com/forum/remark,10500927 Sun, 13 Jun 2004 19:45:30 EDT http://www.dslreports.com/forum/remark,10497975 LBB : Sounds like you are running outdated firmware (5xx vesion)
It is recommended you upgrade to the latest.
»Cayman Routers »How do I Upgrade the Cayman Internet Router Firmware?
»Cayman Routers »Where would I find the Firmware Upgrades for Cayman Routers

LB]]> http://www.dslreports.com/forum/remark,10497975 Sun, 13 Jun 2004 12:22:06 EDT http://www.dslreports.com/forum/remark,10497949 sonettech : Ok I finally got the thing reset. But I do not have the option for pppoe under my dsl/atm options I saw a friends settings and he had the option for pppoe-llc. I do not I only have ppp-llc, and ppp-vc . Is this a firmware issue???]]> http://www.dslreports.com/forum/remark,10497949 Sun, 13 Jun 2004 12:17:47 EDT http://www.dslreports.com/forum/remark,10489714 LBB : First, you need to reset the modem to factory default as layed out here.
»Cayman Routers »How do I clear the configurations through a Telnet Session?
Since you can access the Cayman thru the console, just do steps 2 - 6.

Once complete the Cayman will restart and you can release and renew the ip of the PC by going to the command prompt and typing in ipconfig /release and then type in ipconfig /renew or just reboot the PC.

LB ]]> http://www.dslreports.com/forum/remark,10489714 Sat, 12 Jun 2004 10:11:04 EDT http://www.dslreports.com/forum/remark,10487784 sonettech : the address I am getting when I do the ipconfig is 169.254.22.69 so it wasprobably set up for a static ip. I have dynamic, and need to set the modem up for that. and enable the dhcp. So were do I put my user name and password into this thing and how do you enable dhcp. I found the dhcp setting and it says it is off put how do you turn it on?? Access through the db9 with Procomm+ is fine.]]> http://www.dslreports.com/forum/remark,10487784 Sat, 12 Jun 2004 00:36:11 EDT http://www.dslreports.com/forum/remark,10487401 ucc : Did you try with a "dot" after "cayman-dsl"? THe "dot" character, not the word. cayman-dsl. ]]> http://www.dslreports.com/forum/remark,10487401 Fri, 11 Jun 2004 23:46:56 EDT http://www.dslreports.com/forum/remark,10486817 dgilbert : if you cannot access the cayman at 192.168.1.254, first you need to see what your default gateway is. to do this, goto a command prompt and type in "ipconfig /all" without the quotes, and hit enter. if your address comes up as 169.x.x.x, then you are not getting an ip from the router. if it comes up as any other ip, it should list a gateway, this will be the ip address of the 3220 that you would need to enter in your browser or telnet program. although it won't do much good without the password!

if you are not getting an ip from the 3220, you need to set your NIC to a static ip of 192.168.1.x, subnet 255.255.255.0 and see if you can access it. if not, you MUST use the serial port to access the 3220. this is actually your best bet, it will save on headaches.

also, by not being able to select your network card, do you mean it does not give you a choice for TCP/IP?
--
If you can read this, thank a teacher..........and since it's in English, thank a soldier.]]> http://www.dslreports.com/forum/remark,10486817 Fri, 11 Jun 2004 22:42:19 EDT http://www.dslreports.com/forum/remark,10485182 sonettech : I cannot select my network card for telnet, with hyper terminal, I will try with Pro Comm+. Any other ideas???? PLease help.]]> http://www.dslreports.com/forum/remark,10485182 Fri, 11 Jun 2004 19:34:58 EDT http://www.dslreports.com/forum/remark,10479600 timcuth : There are excellent FAQ's on this site:

»Cayman Routers »How can I reset my Cayman's password?

»Cayman Routers »How do I clear the configurations through a Telnet Session?

Also, many others.

Tim
--
As Milton Berle said, "My wife and I have a perfect understanding. I don't try to run her life and I don't try to run mine."]]> http://www.dslreports.com/forum/remark,10479600 Fri, 11 Jun 2004 08:16:41 EDT http://www.dslreports.com/forum/remark,10479156 public : Use the console port in the back to reset the password, and the LAN ip. Then you can login via the LAN, and use the web setup.]]> http://www.dslreports.com/forum/remark,10479156 Fri, 11 Jun 2004 04:52:11 EDT http://www.dslreports.com/forum/remark,10478250 sonettech : I've been haviong problems with my old modem and I got another from work. I have tried all the ip adresses »cayman-dsl' or '»192.168.1.254 and it will not go anywhere. This 3220 is not new, is there any way to reset it to factory specks??]]> http://www.dslreports.com/forum/remark,10478250 Fri, 11 Jun 2004 00:40:59 EDT