site Search:


 
    All Forums Hot Topics Gallery






how-to block ads


 
Search Topic:
Share Topic
Posting?
Post a:
Post a:
Links: ·AT&T Direct ·AT&T Southwest Reviews ·AT&T FAQ ·Older SBC FAQ ·Phone #s ·AT&T Speed Test
AuthorAll Replies


nunya
Who is John Galt?
Premium,MVM
join:2000-12-23
O Fallon, MO
kudos:5
Reviews:
·Charter
·voip.ms

reply to kmac1

Old, Old, Old NID's formerly known as protectors

Click for full size
Here are some older protectors that some people will still have in their homes. The one on the Left was used in the 40's-60's. The customer wire is on top (historicaly correct). This is where you would install your own wiring. The fatter grey (olive) wire on top is the ground wire. The fat black wire on the bottom is the drop (not customer serviceable). The brass rails are shunts which bypassed the red fuses underneath. The black bakelite (sometimes brass) round piece is the cover for carbon protectors which shunt any overvoltage to ground.

The protector on the right dates back to 1914. Notice it has no shunts and still used the red fuses. The carbon protectors are under the brass cap. It has no wiring because it is old and I do not want to disturb it. It lays out the same as the other.

Many homes still use these protectors. Do not be afraid of them. They will not affect your DSL service and are perfectly capable of protecting your line. You may want to brush off the dryer lint and cobwebs though.
If you are doing your own wiring, do not mess with the drop wire. Remember that there is voltage on the line and it will bite you. Use good wire (cat3, no stranded or flat wire). If you are unsure, CALL A PRO.
--
"It's your world, babe. I'm just livin' in it."

Sunday, 27-May 08:45:53 Terms of Use & Privacy | feedback | contact | Hosting by nac.net - DSL,Hosting & Co-lo
over 12.5 years online © 1999-2012 dslreports.com.
Most commented news this week
Hot Topics