site Search:


Home Reviews Tools Forums FAQs Find Service ISP News Maps About  
 
    All Forums Hot Topics Gallery






how-to block ads

  
Forums >

Equipment Support > Hardware By Brand > Efficient > 5667 Bridge Console + xmodem + Firmware revisted.

Search Topic:
 Uniqs:
3338		 Share Topic
Posting?
Post a:
Post a:
Links: ·FAQ-Efficient Forum ·5260 to 5660 FAQ ·Tweaks ·DrTCP ·Efficient Networks Website ·Common Application Ports
AuthorAll Replies


Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18
1 edit

5667 Bridge Console + xmodem + Firmware revisted.

Part number 060-5667-001 Bridge 5667.

Started with:
ENI version (08 Jun 2001) U43L00207.01/2.3.8.04/1.3.0
Modem SW Version[3.6.72]
Modem DMT Version[1a04]
Hardware Version:U43L00207.01
Software Version:2.3.8.04/1.3.0

Finished with:
Firmware version :R3.1.0
Web UI version :2.6.21
DSL firmware version :3.6.72
Copyright (c) 2001
Modem SW Version[3.6.72]
Modem DMT Version[1a04]

NBfs3
PPboot 7.0.2 (12 Feb 2001)
Copyright (c) 2001
DUAL DECOMPRESS
SDRAM size = 0x800000
.NP..............................................
.................
Found valid boot information block
No, or invalid, configuration information in EEPROM - trying FLASH
Valid configuration (size 256)
atmos_main::atmos_memsize= 800000

NP software version is 0x00000700 (reply took 12us)
ENI version (08 Jun 2001) U43L00207.01/2.3.8.04/1.3.0
Copyright (c) 2000

Download Modem code...

Modem SW Version[3.6.72]
Modem DMT Version[1a04]
Hardware Version:U43L00207.01
Software Version:2.3.8.04/1.3.0
Please input the PASSWORD:********

192.168.1.1> help all

Commands are:

atm      [<command>]           - send command to atm process
bridge   [<command>]           - send command to bridge process
bsp      [<command>]           - send command to bsp process
buffer   [<command>]           - send command to buffer process
bun      [<command>]           - send command to bun process
chips    [<command>]           - send command to chips process
config   [<command>]           - send command to config process
defaultroute                       - set/clear default route
edd      [<command>]           - send command to edd process
ethernet [<command>]           - send command to ethernet process
event    help|next|previous|recent|show|unshow   - control display of events
flashfs  [<command>]           - send command to flashfs process
ip       [<command>]           - send command to ip process
isfs     [<command>]           - send command to isfs process
led      [<command>]           - send command to led process
loaddefault                       - syntax> loaddefault bridge
    Except to password, all the configuration will be restored as
    factory default settings when you execute this command.
oam      [<command>]           - send command to oam process
oamcli   [<command>]           - send command to oamcli process
portcli  [<command>]           - send command to portcli process
reboot                         - Restart system. Any logins over telnet will be
closed.
restart                        - restart system
set                            - set <keyword> <parameters>
Configures various parameters
set dsl restart    - cycle the DSL interface through a reset sequence
set dsl disconnect - disable the DSL interface
show                           - show <keyword>
Displays general information
show conn     - display the PVC information
show dslstats - display statistics of the DSL ATUs
snmp     [<command>]           - send command to snmp process
tftp     [<command>]           - send command to tftp process
uptime                         - show time system has been running
version                        - show system software version
vvb      [<command>]           - send command to vvb process

192.168.1.1> version
ENI version (08 Jun 2001) U43L00207.01/2.3.8.04/1.3.0
192.168.1.1> help snmp
snmp     [<command>]           - send command to snmp process
192.168.1.1> snmp help

Commands are:

  access          config          help            trap
  version

  '.'        repeats the last command
Type "snmp help all" or "snmp help <command>" for more details

192.168.1.1> snmp version
SNMP Version 2.11
192.168.1.1> snmp access
access read public
access write ENI_5667
192.168.1.1> set dsl help
- set dsl <restart|disconnect>
set dsl line restart or disconnect
192.168.1.1> set dsl disconnect
ATU_R is in disorderly or in force idle
192.168.1.1> flashfs help

Commands are:

cat            fsck           id             info
ls             rewrite        trace          update
version        wipe

  '.'        repeats the last command
Type 'help all' or 'help <command>' for more details

192.168.1.1> flashfs ls

  509000 fix image
   35414 fix applet
    2459 fix logo.gif
     216 fix initbrowser
     216 fix initbrowser-br.def
    1196 fix ASW_init.bin
  203159 fix ASW_R_Modem.bin
    7968 fix NPimage
       4 fix initadslmode
     151 dyn info
      41 dyn snmpinit
      94 dyn services
     923 dyn initbridge
     147 dyn resolve
       3 dyn imode
    1332 dyn initbun
       6 dyn initbsp
     484 dyn initable
       0 dyn dhcpd.conf
      29 dyn bcast.dat
       8 dyn init.conf
       0 dyn initportcli
       1 dyn initreflect
       0 dyn ipaddresses

192.168.1.1> flashfs version
FLASHFS v2.18
192.168.1.1> flashfs info
Current file system:  0x20000 - 0x200000  (1920 kBytes)
Devices supported: 1
192.168.1.1> flashfs id
no device specified
192.168.1.1> help flashfs
flashfs  [<command>]           - send command to flashfs process
192.168.1.1> help isfs
isfs     [<command>]           - send command to isfs process
192.168.1.1> isfs help

Commands are:

ls             rm             cat            trace
version

  '.'        repeats the last command
Type 'help all' or 'help <command>' for more details

192.168.1.1> isfs ls

       0 ipaddresses
       1 initreflect
       0 initportcli
       8 init.conf
      29 bcast.dat
       0 dhcpd.conf
     484 initable
       6 initbsp
    1332 initbun
       3 imode
     147 resolve
     923 initbridge
      94 services
      41 snmpinit
     151 info

192.168.1.1>

I then tried a Router Upgrade Firmware made for the 060-5667-501 and it failed to work.

NBfs3
PPboot 7.0.2 (12 Feb 2001)
Copyright (c) 2001
DUAL DECOMPRESS
SDRAM size = 0x800000
Key pressed, stopping boot.

Entered console ... User request.
] xmodem fast
Image relocated - type quit to boot
] quit

Unknown image format (0x08088b1f).
Flash boot failed.

Entered console ... No, or bad, ATMOS images.

]help

Commands to the console are:
 configeeprom             display EEPROM configuration information
 configflash              display FLASH configuration information
        copyimages {yes | no}       copy network booted image files
        flashfs {auto | emergency}  use automatic FLASHFS selection or
                                    force boot from emergency FLASHFS
        initialise                  initialise configuration information
        listenv             list environment variables
        mac <addres         set MAC address
        serialboot yes       boot from EEPROM
        serialbo            boot from FLASH
        setenv <key>        set environment variable
        unsetenv <key       unset environment variable
    The following boos are supported by serial EEPROM v3.0+ only:
        serialboot {yes | auto}    via EEPROM, auto-select Ethernet or USB
        serialboot ethe       boot via EEPROM from Ethernet only
        serialboot us       boot via EEPROM from USB only
        serialboot          boot from FLASH
 dw <address> [<lengtp words (hex/ascii)
 enter <address>   enter an image
 fdw <address> [< dump flash words (hex/ascii)
 help             print this text
 quit                     leavconsole
 rw <address>           a single word
 why                reason for console entry
 ww <address> <valu write a single word
 xmodem [fast]      download mkflash image using X-Modem

] quit

Unknown image format (0x08088b1f).
Flash boot failed.
Entered console ... No, or bad, ATMOS images.
] quit

Next I tried a Bridge Firmware Upgrade attempt.

NBfs3
PPboot 7.0.2 (12 Feb 2001)
Copyright (c) 2001
DUAL DECOMPRESS
SDRAM size = 0x800000
.NP..............................................
.................
Found valid boot information block
No, or invalid, configuration information in EEPROM - trying FLASH
Valid configuration (size 256)
atmos_main::atmos_memsize= 800000

NP software version is 0x00000700 (reply took 11us)
ENI version (08 Jun 2001) U43L00207.01/2.3.8.04/1.3.0
Copyright (c) 2000

Download Modem code...

Modem SW Version[3.6.72]
Modem DMT Version[1a04]

NBfs3
PPboot 7.0.2 (12 Feb 2001)
Copyright (c) 2001
DUAL DECOMPRESS
SDRAM size = 0x800000
Key pressed, stopping boot.

Entered console ... User request.
] xmodem fast
Image relocated - type quit to boot
] quit

Please input the PASSWORD:*****
192.168.254.254> flashfs update

Updating flash filing system ...

done

192.168.254.254>

This worked updating by using a file named 5667_Tobago_R3[1][2].1.0.bin to newer firmware code as seen above.

NBfs3
PPboot 7.0.2 (12 Feb 2001)
Copyright (c) 2001
DUAL DECOMPRESS
SDRAM size = 0x800000
.N.n..............................................
..........................................
Found valid boot information block
No, or invalid, configuration information in EEPROM - trying FLASH
Valid configuration (size 256)

NP software version is 0x00000701 (reply took 11us)
Model Number         :5667 Rev.01
Firmware version     :R3.1.0
Web UI version       :2.6.21
DSL firmware version :3.6.72
Copyright (c) 2001

Download Modem code...

Modem SW Version[3.6.72]
Modem DMT Version[1a04]
Current Modem Status is : IDLE
Current Modem Status is : ACTIVATING

Please input the PASSWORD:*****
192.168.254.254> help

Commands are:

atm            bridge         bsp            buffer         bun
chips          config         defaultroute   edd            ethernet
event          flashfs        ip             isfs           led
loaddefault    oam            oamcli         portcli        reboot
reflect        restart        set            show           snmp
tftp           upgradekey     uptime         version        vvb
xmodem

  '.'        repeats the last command
Type 'help all' or 'help <command>' for more details

192.168.254.254>

Current Modem Status is : IDLE
Current Modem Status is : ACTIVATING

192.168.254.254> set
set <keyword> <parameters>
Configures various parameters
set dsl restart    - cycle the DSL interface through a reset sequence
set dsl disconnect - disable the DSL interface

192.168.254.254> set dsl disconnect
192.168.254.254> Current Modem Status is : FORCED IDLE
192.168.254.254> help all

Commands are:

atm      [<command>]           - send command to atm process
bridge   [<command>]           - send command to bridge process
bsp      [<command>]           - send command to bsp process
buffer   [<command>]           - send command to buffer process
bun      [<command>]           - send command to bun process
chips    [<command>]           - send command to chips process
config   [<command>]           - send command to config process
defaultroute                       - set/clear default route
edd      [<command>]           - send command to edd process
ethernet [<command>]           - send command to ethernet process
event    help|next|previous|recent|show|unshow   - control display of events
flashfs  [<command>]           - send command to flashfs process
ip       [<command>]           - send command to ip process
isfs     [<command>]           - send command to isfs process
led      [<command>]           - send command to led process
loaddefault                       - syntax> loaddefault bridge
    Except to password, all the configuration will be restored as
    factory default settings when you execute this command.

oam      [<command>]           - send command to oam process
oamcli   [<command>]           - send command to oamcli process
portcli  [<command>]           - send command to portcli process
reboot                         - Restart system. Any logins over telnet will be
closed.
reflect  [<command>]           - send command to reflect process
restart                        - restart system
set                            - set <keyword> <parameters>
Configures various parameters
set dsl restart    - cycle the DSL interface through a reset sequence
set dsl disconnect - disable the DSL interface

show                           - show <keyword>
Displays general information
show conn     - display the PVC information
show dslstats - display statistics of the DSL ATUs

snmp     [<command>]           - send command to snmp process
tftp     [<command>]           - send command to tftp process
upgradekey                       - Upgrade the firmware of modem

Commands :
upgradekey read        - Read the upgrade key from modem
upgradekey write <key> - Write the upgrade key to modem

uptime                         - show time system has been running
version                        - show system software version
vvb      [<command>]           - send command to vvb process
xmodem                         - Download firmware through Xmodem

Commands :
xmodem       - Normal upgrade speed ( 9600  baud rate )
xmodem fast  - Fast upgrade speed   ( 38400 baud rate  )

192.168.254.254> flashfs help

Commands are:

cat            config         fsck           id
info           ls             rewrite        trace
update         version        wipe

  '.'        repeats the last command
Type 'help all' or 'help <command>' for more details

192.168.254.254> flashfs info
Current file system:  0x20000 - 0x200000  (1920 kBytes)
Devices supported: 1

192.168.254.254> flashfs ls

   35414 fix applet
    2459 fix logo.gif
       4 fix initadslmode
    7756 fix NPimage
  721403 fix image
    1196 fix ASW_init.bin
  203159 fix ASW_R_Modem.bin
     216 fix initbrowser
     216 fix initbrowser-br.def
   73223 fix inithttp
     484 dyn initable
      29 dyn bcast.dat
    1443 dyn def_settings
    1273 dyn def_settings-b
       2 dyn dhclient.conf
       2 dyn dhclient.conf-b
       2 dyn dhclient.leases
       2 dyn dhclient.leases-b
     224 dyn dhcpd.conf
       2 dyn dhcpd.conf-b
       0 dyn dhcpd.leases
       2 dyn dhcpd.leases-b
       3 dyn imode
     100 dyn info
       8 dyn init.conf
      50 dyn initbridge
    1014 dyn initbridge-b
       7 dyn initbsp
    1151 dyn initbun
       2 dyn initconfig
      22 dyn initdnsrelay
       9 dyn initdnsrelay-b
       9 dyn initnat
       9 dyn initnat-b
       2 dyn initportcli
     546 dyn initppp
       2 dyn initppp-b
       1 dyn initreflect
       2 dyn ipaddresses
     393 dyn resolve
     125 dyn resolve-b
     124 dyn services
      41 dyn services-b
       0 dyn snmp.dat
      40 dyn snmpinit

192.168.254.254> flashfs version
FLASHFS v2.18

192.168.254.254> isfs help

Commands are:

ls             rm             cat            trace
version

  '.'        repeats the last command
Type 'help all' or 'help <command>' for more details

192.168.254.254> isfs version
ISFS v2.08

192.168.254.254> isfs ls

      40 snmpinit
       0 snmp.dat
      41 services-b
     124 services
     125 resolve-b
     393 resolve
       2 ipaddresses
       1 initreflect
       2 initppp-b
     546 initppp
       2 initportcli
       9 initnat-b
       9 initnat
       9 initdnsrelay-b
      22 initdnsrelay
       2 initconfig
    1151 initbun
       7 initbsp
    1014 initbridge-b
      50 initbridge
       8 init.conf
     100 info
       3 imode
       2 dhcpd.leases-b
       0 dhcpd.leases
       2 dhcpd.conf-b
     224 dhcpd.conf
       2 dhclient.leases-b
       2 dhclient.leases
       2 dhclient.conf-b
       2 dhclient.conf
    1273 def_settings-b
    1443 def_settings
      29 bcast.dat
     484 initable

192.168.254.254> snmp help

Commands are:

  access          config          help            trap
  version

  '.'        repeats the last command
Type "snmp help all" or "snmp help <command>" for more details

192.168.254.254> snmp help all

access syntax:
  snmp access [read | write] <community> [<IP addr>]
                   - allow read-only or read-write access
  snmp access delete <community> [<IP addr>]
                   - revoke specified access
  snmp access flush
                   - revoke all access
  snmp access list - list allowed access

config syntax:
  config [save]    - display config or save to flash

help syntax:
  snmp help        - list commands available
  snmp help all    - list commands and their syntax
  snmp help <cmd>  - list syntax for command

trap syntax:
  snmp trap add <community> <IP addr> [<port>]
                   - add a trap destination
  snmp trap delete <community> <IP addr> [<port>]
                   - delete a trap destination
  snmp trap flush  - delete all trap destinations
  snmp trap list   - list trap destinations

version syntax:
  version          - display version information

192.168.254.254> snmp access list

access read public
access write admin

192.168.254.254> reboot

I have tried another BIN file but it will not accept it as a valid image to upgrade to Router.

Any help or insight would be appreciated.

The original LAN IP was 192.168.1.1 and the password was "ENI_5667" now after the update the LAN IP is 192.168.254.254 with the password "admin" (Which is also the same as the write string for each versions SNMP).

Regards,

Doctor Olds
to forum · permalink · 2004-08-19 02:36:04 ·


Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18
1 edit

Re: 5667 Bridge Console + xmodem + Firmware revist

Here are the steps to install and then update the 5667 Bridge Firmware (or repair a Bridge 5667 with Flashing LEDs that has lost its Firmware during a reset):

quote:
Procedure for loading 5667 firmware

Connect the serial console cable between the 5667 and the
Com port on a PC.

The console settings are:

Bits per Second: 9600
Data bits: 8
Parity: None
Stop bits: 1
Flow Control: None

1. Power off the 5667 modem.

2. While holding the space bar, power on the 5667 modem.

3. The 5667 modem will enter boot mode, you should see the
   following:

   Entered console ...... User request

   [ _

4. Enter the command: xmodem fast

5. At this point you must change the Bit per Second
   configuration from 9600 to 38400.
   Select the disconnect button from HyperTerminal, change
   the Bits per sec, and re-connect..

6. Select the Transfer pull-down menu and choose the Send.

7. Click on the Browse button and locate the *.bin file.

8. Make sure that you select xmodem as the transfer
   protocol.

9. Click Send, this will take approximately 5 minutes.

10. Once the firmware upgrade is complete, type quit.

11. At this point you must change the Bit per Second
    configuration from 38400 to 9600. Select the disconnect
    button from HyperTerminal, change the Bits per sec, and
    re-connect

12: The 5667 modem will start-up again.

13. Once the modem is up, log on via the console, the
    default password is admin.

14. Enter the command flashfs update
Hope this helps!

Regards,

Doctor Olds
to forum · permalink · 2004-08-19 04:05:46 ·


Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18

Related threads:

»[DSL] 5667 firmware reload
»Xmodem download firmware for 5667
»SpeedStream 5667 down, pls help?
»speedstream 5667 dead!! Help Please!!
»speedstream 5667 image download
»5667 Missing Firmware
»Is this 5667 Bridge Firmware?

to forum · permalink · 2004-08-19 06:18:42 ·

ICGabe

join:2003-09-25
Dallas, TX

reply to Doctor Olds

Re: 5667 Bridge Console + xmodem + Firmware revisted.

Have you tried the router firmware made for the 060-5667-101?
The image name is: eni5667_tmr_36100-tobago-usb-gateway.img
There is also this variation: eni5667_tmrbr_36100-tobago-usb-gateway.img
to forum · permalink · 2004-08-19 10:07:15 ·


Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18

Re: 5667 Bridge Console + xmodem + Firmware revist

Yes, It will not work on a 060-5660-001.

Confirmed in this thread:
»Xmodem download firmware for 5667

Regards,

Doctor Olds
to forum · permalink · 2004-08-19 10:40:14 ·


Doctor Olds
I Need A Remedy For What's Ailing Me.
Premium,VIP
join:2001-04-19
1970 442 W30
kudos:18
1 edit


Manual Main Page
ATMOS_Consol···nual.zip 756,867 bytes
ATMOS Console Commands Reference Manual		  
This zipped PDF file Command Guide may help with other CLI commands.

If anyone has more info please share.

Regards,

Doctor Olds
to forum · permalink · 2004-08-23 06:24:27 ·
Forums > Equipment Support > Hardware By Brand > Efficient

Tuesday, 21-May 13:45:08 Terms of Use & Privacy | feedback | contact | Hosting by nac.net - DSL,Hosting & Co-lo
over 13.5 years online © 1999-2013 dslreports.com.
Most commented news this week
Hot Topics