fbruno
join:2000-04-06
Berwyn, PA | [MCI] Moving from Speedstream 5100 to Cisco 837 Moving from 5100 to Cisco837
I have ADSL service from MCI as part of their comprehensive residential package. It is a good deal at $19.95 a month for the DSL. They provided a SpeedStream 5100, part number 060-E141-A0S.
I do not have to use PPOE or any username to logon. This is a straight plug it in and get a DHCP address situation. Just like the good old Northpoint days.
I am trying to cut out the 5100 by using a new Cisco 837 ADSL router. It is a very nice unit, with a strong integrated firewall and VPN support. It would be even nicer if I could get it to work...
Here is the issue. I need to enter the ATM VPI/VCI information that will work on this MCI provided DSL connection. Since this 5100 is just a bridge, I have no idea what those values might be. I have so far tried the usual 0/35, 8/35 values.
Please let me know your thoughts and suggestions on how I can continue working on this issue. Many thanks for your help. |
|
HooperPremium
join:2001-10-22
Villanova, PA
1 edit | Re: [MCI] Moving from Speedstream 5100 to Cisco 83 WAN Data PVC 0*35
WAN Protocol RFC 1483
WAN Connection Speed DOWN 1536Kb/s : UP 727Kb/s
Bridging disabled
IP Routing enabled |
|
fbruno
join:2000-04-06
Berwyn, PA | Thanks for the info. I gave it a try with no success. Here is a portion of the running config and a debug atm events. Any suggestions will be much appreciated.
interface Ethernet0
ip address 192.168.97.2 255.255.255.0
hold-queue 100 out
!
interface ATM0
no ip address
no atm ilmi-keepalive
dsl operating-mode auto
!
interface ATM0.1 point-to-point
ip address dhcp
pvc 0/35
encapsulation aal5snap
!
Mar 1 00:18:02.215: %LINEPROTO-5-UPDOWN: Line protocol on Interface ATM0, changed state to up
*Mar 1 00:18:06.219: DHCP: allocate request
*Mar 1 00:18:06.219: DHCP: new entry. add to queue
*Mar 1 00:18:06.219: DHCP: SDiscover attempt # 1 for entry:
*Mar 1 00:18:06.219: DHCP: SDiscover: sending 303 byte length DHCP packet
*Mar 1 00:18:06.219: DHCP: SDiscover 303 bytes
*Mar 1 00:18:06.219: B'cast on ATM0.1 interface from 0.0.0.0
*Mar 1 00:18:09.219: DHCP: SDiscover attempt # 2 for entry:
*Mar 1 00:18:09.219: DHCP: SDiscover: sending 303 byte length DHCP packet
*Mar 1 00:18:09.219: DHCP: SDiscover 303 bytes
*Mar 1 00:18:09.219: B'cast on ATM0.1 interface from 0.0.0.0
*Mar 1 00:18:12.219: DHCP: SDiscover attempt # 3 for entry:
*Mar 1 00:18:12.219: DHCP: SDiscover: sending 303 byte length DHCP packet
*Mar 1 00:18:12.219: DHCP: SDiscover 303 bytes
*Mar 1 00:18:12.219: B'cast on ATM0.1 interface from 0.0.0.0%Unknown DHCP problem.. No allocation possible |
|
|
|
