A50 FW on 5200, no telnet or FTP !!! in Efficient http://www.dslreports.com/forum/r11727567 en Sat, 28 Nov 2009 19:22:08 EDT Sat, 28 Nov 2009 19:22:08 EDT Re: A50 FW on 5200, no telnet or FTP !!! http://www.dslreports.com/forum/remark,11751064 Doctor Olds :
said by gpontis See Profile:

It should be mentioned that upro#1 is unrelated to user profile #1 that can be modified from the web GUI.
Correct!! The three hidden profiles are numbered 0, 1, 2 (not 1, 2, 3).

Regards,

Doctor Olds]]> http://www.dslreports.com/forum/remark,11751064 Mon, 01 Nov 2004 23:11:03 EDT Re: A50 FW on 5200, no telnet or FTP !!! http://www.dslreports.com/forum/remark,11750579 gpontis : Ahhh, I forgot that the telnet login was the same as that for FTP. Works great after using ICGabe's util. Many thanks.

It should be mentioned that upro#1 is unrelated to user profile #1 that can be modified from the web GUI.]]> http://www.dslreports.com/forum/remark,11750579 Mon, 01 Nov 2004 22:22:10 EDT Re: A50 FW on 5200, no telnet or FTP !!! http://www.dslreports.com/forum/remark,11728933 buggage : Yes, the A50 does not come with Telnet/FTP acces. You can change this however, and create your own username and password.

Use ICGabe's utility to telnet into the modem.

Once in, type these commands:

cfg upro#1{usr{un=username
cfg upro#1{usr{pw=password
cfg upro#1{usr{per=0xFFFFFFFF
cfg save
do reboot

When the modem reboots, you will be able to telnet/FTP using the username and password you created. You won't need to use the FTP Tool again, unless you reset the modem.]]> http://www.dslreports.com/forum/remark,11728933 Sat, 30 Oct 2004 10:42:20 EDT Re: A50 FW on 5200, no telnet or FTP !!! http://www.dslreports.com/forum/remark,11728728 Doctor Olds : What IP did you use in the setup of the 3 profiles?

What are you trying to get from the FTP server?

Did you read the 2 long threads linked in the FAQ?

Regards,

Doctor Olds]]> http://www.dslreports.com/forum/remark,11728728 Sat, 30 Oct 2004 09:53:33 EDT Re: A50 FW on 5200, no telnet or FTP !!! http://www.dslreports.com/forum/remark,11728681 gpontis : If I am the first, then it gives me hope that these modes can be made to work on my box(es) too. One reason that I did not rush to try the FTP reset program is that I wasn't sure exactly what I would FTP over to the box even if I could. The A50 .def file appears to only have one login/pass of admin/admin. My understanding of ICGabe's utility is that the new password is only good long enough to connect through FTP once.]]> http://www.dslreports.com/forum/remark,11728681 Sat, 30 Oct 2004 09:43:33 EDT Re: A50 FW on 5200, no telnet or FTP !!! http://www.dslreports.com/forum/remark,11728092 Doctor Olds : You are the first poster to have this problem, so I don't know of any solutions to tell you or whether what you are seeing is applicable for the A50. Sorry.

Did you try the FTP reset program?
»Efficient Networks Forum FAQ »How do I set/reset the 5200 FTP/Telnet Login and Password?

Regards,

Doctor Olds]]> http://www.dslreports.com/forum/remark,11728092 Sat, 30 Oct 2004 04:53:40 EDT A50 FW on 5200, no telnet or FTP !!! http://www.dslreports.com/forum/remark,11727567 gpontis : I am experimenting with the A50 firmware on an E240 version 5200. Seems to be working OK in terms of the web interface and DSL link.

I cannot log into the modem using telnet, and I also cannot connect via FTP. Telnet asks for login/password, but nothing that I know to put in is accepted. FTP rejects any login name that I have tried before it even gets to asking for a password.

I have tried entering new profiles and enabling everything. Also, I have tried the direct access with "http://192.168.254.254/pfwizardj.cgi?code=EDIT&id=prof1&retain=f".

Is it possible that telnet and FTP are not supported in this firmware ? (That would be dissappointing...)]]> http://www.dslreports.com/forum/remark,11727567 Sat, 30 Oct 2004 01:32:14 EDT