[Monitoring] Samurize plugin for Alchemy in Linksys http://www.dslreports.com/forum/r12711474 en Tue, 01 Dec 2009 00:00:13 EDT Tue, 01 Dec 2009 00:00:13 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13335720 wifi4milez : I notice that this plugin was meant for Sveasoft. Will it work with stock Linksys firmware or hyperwrt as well? It looks fantastic!
--
I like dogs, guns, and cheeseburgers. Whats your malfunction?]]> http://www.dslreports.com/forum/remark,13335720 Thu, 05 May 2005 10:51:43 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13333544 nauticax :
said by GI Suck See Profile:

Once again I have updated my Samurize to show more data. This time it shows total amount of data transfered via VLAN1. (or the WAN port in this case) I'm lovin it!
Sorry to bring this back from the dead but how did you monitor total amount of bandwidth usage (data transferred) for your WAN port?]]> http://www.dslreports.com/forum/remark,13333544 Thu, 05 May 2005 00:18:06 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13208541 XCOM : You could run DD-WRT and create a dyndns account then enable the sysinfo page and you can see all your router information any where you go..
--
@root I.T.]]> http://www.dslreports.com/forum/remark,13208541 Tue, 19 Apr 2005 13:41:24 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13207709 twosox : Just wanted to see if I could essentially monitor the line from somewhere, say, like at work, for instance. I probably wouldn't need all of the stats, but maybe the router load and just to know that the connection is still running.

Sox]]> http://www.dslreports.com/forum/remark,13207709 Tue, 19 Apr 2005 11:56:55 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13189448 Nate425 : Ok, I just noticed that under where it says Select function to run: it doesn't have anything that looks like router load. Is that all that's missing?

Other than that, I have SNMP enabled on my router, and it's a v2.0 router, so I would assume it's the same OID as the default? Everything else works fine with the default OID, so I'm assuming that's ok. Thanks for your help.]]> http://www.dslreports.com/forum/remark,13189448 Sat, 16 Apr 2005 23:38:31 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13189113 digiblur :
said by Nate425 See Profile:

Forgive me if this is something obvious...

I have everything working fine, and it's really cool, except the router load only displays a % with no number there. I can't seem to get that to display the router load. What should I change? I've put in the correct IP address of the router, and the password, and have LoadAlchemyStatus running as well as LoadAlchemyWireless. What am i missing? Thanks!
Do you have SNMP enabled on the router? Your router might have a different OID for the router load?
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device.]]> http://www.dslreports.com/forum/remark,13189113 Sat, 16 Apr 2005 22:42:34 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13188336 Nate425 : Forgive me if this is something obvious...

I have everything working fine, and it's really cool, except the router load only displays a % with no number there. I can't seem to get that to display the router load. What should I change? I've put in the correct IP address of the router, and the password, and have LoadAlchemyStatus running as well as LoadAlchemyWireless. What am i missing? Thanks!]]> http://www.dslreports.com/forum/remark,13188336 Sat, 16 Apr 2005 20:32:22 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13182862 GI Suck :
said by ocman See Profile:

gi suck, how can I get your monitoring window?
Just edit the config file and do a google search for iod's for the wrt54g.]]> http://www.dslreports.com/forum/remark,13182862 Fri, 15 Apr 2005 23:52:44 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13181021 ocman : gi suck, how can I get your monitoring window?]]> http://www.dslreports.com/forum/remark,13181021 Fri, 15 Apr 2005 19:38:00 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13179582 digiblur :
said by twosox See Profile:

Is there a way to do this remotely? (i.e outside the private LAN from the WAN side)

Would you have to forward the SNMP ports or something like that?

Sox
Which of the stats would you like to monitor?
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device.]]> http://www.dslreports.com/forum/remark,13179582 Fri, 15 Apr 2005 16:20:10 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13176729 twosox : Is there a way to do this remotely? (i.e outside the private LAN from the WAN side)

Would you have to forward the SNMP ports or something like that?

Sox]]> http://www.dslreports.com/forum/remark,13176729 Fri, 15 Apr 2005 10:02:15 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13173253 GI Suck :
said by digiblur See Profile:

said by GI Suck See Profile:

Once again I have updated my Samurize to show more data. This time it shows total amount of data transfered via VLAN1. (or the WAN port in this case) I'm lovin it!
I had the same thing but when I found out it only goes up to 4gb then flips over I took it off.
Damnit! I guess it exceeded the bit limit! Just noticed that now! :( oh well, live and learn!
--
[Internet] Rogers Yahoo! Extreme 5mbps/800kbps [Modem] Scientific Atlanta WebSTAR DPX2100 DOCSIS 2.0 [Router] WRT54g DD-WRT #21c [Computer] P4 2.53GHz 1024MB RAM ATi 9700 Pro Sound Blaster Audigy 160GB RAID 0]]> http://www.dslreports.com/forum/remark,13173253 Thu, 14 Apr 2005 21:02:17 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13165702 Bill :
said by digiblur See Profile:

said by Bill See Profile:

said by eugenegill See Profile:

said by Bill See Profile:

You were right, I hadn't modified the password that the "Load" meters were using to get their data.
Please explain how to change the password. Darned it I can find it!
Go into the .ini file and look for this:

quote:
[Source 22]
Type=TActiveDLLCollector

Or you could just open the Samurize config tool and edit the meter the easy way ;)
That'd be too easy ;):p
--
The new Secure-Wifi.net is open!
]]> http://www.dslreports.com/forum/remark,13165702 Thu, 14 Apr 2005 00:04:20 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13165502 digiblur :
said by GI Suck See Profile:

Once again I have updated my Samurize to show more data. This time it shows total amount of data transfered via VLAN1. (or the WAN port in this case) I'm lovin it!
I had the same thing but when I found out it only goes up to 4gb then flips over I took it off.
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device.]]> http://www.dslreports.com/forum/remark,13165502 Wed, 13 Apr 2005 23:40:57 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13165488 digiblur :
said by Bill See Profile:

said by eugenegill See Profile:

said by Bill See Profile:

You were right, I hadn't modified the password that the "Load" meters were using to get their data.
Please explain how to change the password. Darned it I can find it!
Go into the .ini file and look for this:

quote:
[Source 22]
Type=TActiveDLLCollector

Or you could just open the Samurize config tool and edit the meter the easy way ;)
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device.]]> http://www.dslreports.com/forum/remark,13165488 Wed, 13 Apr 2005 23:39:53 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13162770 GI Suck : Once again I have updated my Samurize to show more data. This time it shows total amount of data transfered via VLAN1. (or the WAN port in this case) I'm lovin it!

Samurize Updated Again
]]> http://www.dslreports.com/forum/remark,13162770 Wed, 13 Apr 2005 18:41:39 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13162149 Bill :
said by eugenegill See Profile:

said by Bill See Profile:

You were right, I hadn't modified the password that the "Load" meters were using to get their data.
Please explain how to change the password. Darned it I can find it!
Go into the .ini file and look for this:

quote:
[Source 22]
Type=TActiveDLLCollector
DLLName=AlchemyStats.dll
DLLFunction=LoadAlchemyWireless
Param0=Your routers IP goes here
Param1=Your web-config login pw goes here
Param2=60


and

quote:
[Source 33]
Type=TActiveDLLCollector
DLLName=AlchemyStats.dll
DLLFunction=LoadAlchemyStatus
Param0=Your routers IP goes here
Param1=Your web-config login pw goes here
Param2=200


and

quote:
[Source 34]
Type=TActiveDLLCollector
DLLName=AlchemyStats.dll
DLLFunction=LoadAlchemyDHCP
Param0=Your routers IP goes here
Param1=Your web-config pw goes here
Param2=120


The other ones will use the SNMP string.
--
The new Secure-Wifi.net is open!
]]> http://www.dslreports.com/forum/remark,13162149 Wed, 13 Apr 2005 17:31:23 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13162080 eugenegill :
said by Bill See Profile:

You were right, I hadn't modified the password that the "Load" meters were using to get their data.
Please explain how to change the password. Darned it I can find it!]]> http://www.dslreports.com/forum/remark,13162080 Wed, 13 Apr 2005 17:23:03 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13153049 Skyrunner8 : Would it be possible to do this by the command line and not by http?
--
-Jeff]]> http://www.dslreports.com/forum/remark,13153049 Tue, 12 Apr 2005 17:37:06 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13146665 ahubbard : i know some of them, but svea forum might be the best place to ask that]]> http://www.dslreports.com/forum/remark,13146665 Mon, 11 Apr 2005 22:14:45 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13145539 Skyrunner8 : Is there any way to get these statistics from a command line?
--
-Jeff]]> http://www.dslreports.com/forum/remark,13145539 Mon, 11 Apr 2005 20:10:07 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13143782 Skyrunner8 : It seems though that if i just don't do the DCHP call, it doesn't crash the HTTPD. Anybody else want to confirm this?
edit: Nm, just the other did crash it. I am trying just wireless call right now...]]> http://www.dslreports.com/forum/remark,13143782 Mon, 11 Apr 2005 16:37:47 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13141798 digiblur :
said by Skyrunner8 See Profile:

Exactly....I went with a couple of days w/out using this plugin for samurzie and the router didn't die. Weird.....

This isn't just the web interface that is dieing, its not giving out new DHCP addresses, etc.....

Also: Why not make it so when you click on certain statistics, it takes you to the webpage in the router interface? I just added it to my custom version. I think these people would love it! :)

If I ever release another version I might add this in to the sample file.

Actually the whole project got canned twice and was recoded three times or so in an attempt to overcome the HTTPD problem. A few users at Sveasoft wanted it so I went ahead and finished it in hopes someone would figure out the problem with HTTPD dying.

On the other hand, in my Sipura plugin I can hit the Sipura device with an HTTP request every second even while it's holding two phone calls without any performance problems.
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device.]]> http://www.dslreports.com/forum/remark,13141798 Mon, 11 Apr 2005 12:02:35 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13137251 Skyrunner8 : Go into the Administration tab and enabled SNMP. That should fix it :)
--
-Jeff]]> http://www.dslreports.com/forum/remark,13137251 Sun, 10 Apr 2005 19:46:35 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13136900 Skyrunner8 : Exactly....I went with a couple of days w/out using this plugin for samurzie and the router didn't die. Weird.....

This isn't just the web interface that is dieing, its not giving out new DHCP addresses, etc.....

Also: Why not make it so when you click on certain statistics, it takes you to the webpage in the router interface? I just added it to my custom version. I think these people would love it! :)

--
-Jeff]]> http://www.dslreports.com/forum/remark,13136900 Sun, 10 Apr 2005 18:46:58 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13136776 djrobsd : Hi,

I'm having difficulty getting all the stuff to show up on my setup. I'm running Alchemy-pre7a v3.37.6.8sv and it shows the uptime, WAN IP, gateway, WLAN rate, and WLAN channel, as well as all the wireless clients, but I can't get the traffic to show, it just says "Error kb/s" and "error%" on router load..

Any ideas how I can fix this?]]> http://www.dslreports.com/forum/remark,13136776 Sun, 10 Apr 2005 18:25:18 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13131498 SniperKilla : -Nevermind-
got DHCPD setup properly now it says that the lease never expires.. ;) im used to the 4 netgears i owned before this.. this is my first linksys.. the netgears called it address reservation or something like that

]]> http://www.dslreports.com/forum/remark,13131498 Sat, 09 Apr 2005 21:38:31 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13131393 digiblur :
said by SniperKilla See Profile:

ah.. i dont use DHCP on my clients so i guess im screwed on that one ;)
You use statics? Why not use DHCP statics?]]> http://www.dslreports.com/forum/remark,13131393 Sat, 09 Apr 2005 21:22:42 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13131299 SniperKilla : ah.. i dont use DHCP on my clients so i guess im screwed on that one ;)]]> http://www.dslreports.com/forum/remark,13131299 Sat, 09 Apr 2005 21:05:52 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13131268 digiblur :
said by digiblur See Profile:

7. Do not be alarmed when the MACID is shown as the wireless client ID. This is due to the way I coded the DHCP matching engine to keep the number of HTTP pulls down. Once the plugin finds a MAC ID displayed, a flag is set to pull the DHCP table during the next update. At the next update the MAC ID will change to the host name provided in the DHCP table. The DHCP table is only pulled when needed this way. If LoadAlchemyDHCP is used, the MAC ID's will only be converted to the hostname when the LoadAlchemyDHCP meter is pulled.

--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device.]]> http://www.dslreports.com/forum/remark,13131268 Sat, 09 Apr 2005 21:01:34 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13131213 SniperKilla : how are you guys getting the names to show up under wireless connections? the only thing i can get to show up is the MAC address]]> http://www.dslreports.com/forum/remark,13131213 Sat, 09 Apr 2005 20:52:45 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13129163 imrf : That's exactly what mine does after 12 hours or so. It did it with the previous plugin too. A power cycle fixes the problem for me, but it's a tad annoying.]]> http://www.dslreports.com/forum/remark,13129163 Sat, 09 Apr 2005 15:40:04 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13129058 digiblur :
said by Skyrunner8 See Profile:

I am having somewhat of a different problem. Ever since I started, my router will go into what I call hiding mode. It wont' give out any other DHCP addresses, the wireless in the status page says Channel 0, and all the DHCP info that it picked up for the WAN is gone. I tried disabling SNMP but it still seems to do it. Any ideas anybody?
Like this ;)

»members.cox.net/wrt54g/dead1.jpg
»members.cox.net/wrt54g/dead2.jpg
»members.cox.net/wrt54g/dead3.jpg
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device.]]> http://www.dslreports.com/forum/remark,13129058 Sat, 09 Apr 2005 15:26:31 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13128755 Skyrunner8 : I am having somewhat of a different problem. Ever since I started, my router will go into what I call hiding mode. It wont' give out any other DHCP addresses, the wireless in the status page says Channel 0, and all the DHCP info that it picked up for the WAN is gone. I tried disabling SNMP but it still seems to do it. Any ideas anybody?
--
-Jeff]]> http://www.dslreports.com/forum/remark,13128755 Sat, 09 Apr 2005 14:38:11 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13128659 digiblur : I've been monitoring my WRT54G via SNMP for about 3-4 months now and I've never experienced the 100% thing.

To revive the httpd use telnet to do the following:

killall httpd
/usr/sbin/httpd -d /www

I told Sveasoft about it and hopefully one of the dev team members can recreate the error. I found out it is the LoadAlchemyStatus meter that causes this.

Does anyone see a need for another Linksys model monitoring?
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device.]]> http://www.dslreports.com/forum/remark,13128659 Sat, 09 Apr 2005 14:22:54 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13127459 imrf : Mine does the same thing. Yes, to get all the data back the router needs to be rebooted/restarted. The last version did this to me too. ]]> http://www.dslreports.com/forum/remark,13127459 Sat, 09 Apr 2005 11:23:49 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13127375 Bill : Hrmm.. I'm having the problem where it kills the routers web-interface.

I've changed the update interval, as suggested, but it still won't work.

Do I need to restart the router?
--
The new Secure-Wifi.net is open!
]]> http://www.dslreports.com/forum/remark,13127375 Sat, 09 Apr 2005 11:05:53 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13127355 nightemaster : ok i figured out how to fix the above 100% thingie, you just change the conversion factor to something like 50 on mines.]]> http://www.dslreports.com/forum/remark,13127355 Sat, 09 Apr 2005 11:00:25 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13125573 Skyrunner8 : weird... same with mine. at first it was fine, but after a couple of router reboots, its at 111%. I set up an alarm to turn it red if it is over 80....now its all in the red.
--
-Jeff]]> http://www.dslreports.com/forum/remark,13125573 Sat, 09 Apr 2005 00:43:06 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13125366 pipdipchip : If anyone comes out with another cool layout or MOD. I'd love to host it.
--
CCNA Training in Progress - Webmaster of WRT54G.com]]> http://www.dslreports.com/forum/remark,13125366 Sat, 09 Apr 2005 00:04:21 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13125214 GI Suck : I refined the layout a bit so that you can see both WLAN transfer bars, and also included CPU load for 1 min, 5 mins and 10 mins!

What do you think?
Click for full size
My refined layout!
]]> http://www.dslreports.com/forum/remark,13125214 Fri, 08 Apr 2005 23:41:35 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13124473 Skyrunner8 : I have 16 people in my house (I go to college). Its amazing that there is that little right now. I just set it up to be red if the WAN Rx is over 325 KB/s and WAN TX is over 50, to be helpful. The Graph is now working well, and I am loving it. Anybody else mess with it and get their own setup?
--
-Jeff]]> http://www.dslreports.com/forum/remark,13124473 Fri, 08 Apr 2005 22:04:25 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13124263 Bill : Looks good :)

you got lots of people using that AP, don't you ;)
--
The new Secure-Wifi.net is open!
]]> http://www.dslreports.com/forum/remark,13124263 Fri, 08 Apr 2005 21:34:06 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13124250 Skyrunner8 : After futzing around with it for a while, I finally got this, as it fits with the rest of my theme. A little cramped, but it gets the job done :)

Tell me what you think.
--
-Jeff
]]> http://www.dslreports.com/forum/remark,13124250 Fri, 08 Apr 2005 21:32:41 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13124167 Matt :
said by mcaslan See Profile:

I've got my router @ 192.168.2.1 and my default password changed to let's say 'password'. DO I need to enable the syslogd or is this done through SNMP, and if SNMP where do I load my SNMP details where the Name has been modified...

Thanks looking forward to using this...
No, you don't need to enable Syslogd.]]> http://www.dslreports.com/forum/remark,13124167 Fri, 08 Apr 2005 21:21:20 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13124033 mcaslan : I've got my router @ 192.168.2.1 and my default password changed to let's say 'password'. DO I need to enable the syslogd or is this done through SNMP, and if SNMP where do I load my SNMP details where the Name has been modified...

Thanks looking forward to using this...]]> http://www.dslreports.com/forum/remark,13124033 Fri, 08 Apr 2005 21:03:21 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13123910 djlimon : I must have screwed something up. I am on Alchemy 7a and can't get the Router Load % to run. What are the values associated with meter 15?]]> http://www.dslreports.com/forum/remark,13123910 Fri, 08 Apr 2005 20:45:31 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13123040 digiblur : The SNMP calls are not part of my Alchemy plugin it's just a standard SNMP plugin found at Samurize, but I included it with the SAM file to make the monitoring complete. Like I stated above, your SNMP OID's might be different on your version of your WRT54G, the sample file I included is just that...a sample.

AlchemyStats.dll plugin reads the router from it's HTML output of the administration pages.

I'll look into the survey mode page.
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device.]]> http://www.dslreports.com/forum/remark,13123040 Fri, 08 Apr 2005 18:44:31 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13122706 nightemaster : i think theres an error with the router load, because it frequently goes up to 250%]]> http://www.dslreports.com/forum/remark,13122706 Fri, 08 Apr 2005 18:00:37 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13122517 r81984 : Hey, i do not understand how samurize reads the router. I looked at the config and could not figure it out. Could you possibly post sort of a tutorial.
Also is it possible to read the APs found in the site survey when the router is in client mode??]]> http://www.dslreports.com/forum/remark,13122517 Fri, 08 Apr 2005 17:37:09 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13122295 Matt :
said by Skyrunner8 See Profile:

right click on the icon in the bottem corner and do Edit Config
Thanks! I just figured it out!
]]> http://www.dslreports.com/forum/remark,13122295 Fri, 08 Apr 2005 17:09:47 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13122198 Skyrunner8 : right click on the icon in the bottem corner and do Edit Config
--
-Jeff]]> http://www.dslreports.com/forum/remark,13122198 Fri, 08 Apr 2005 16:56:05 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13122126 Matt : This is KICK ASS!

One question since I'm new to Samurize, how do I shift the upper box to the right instead of the left?

Also, I need to add a little more space for my router name in the title as well as on the DHCP Table.
]]> http://www.dslreports.com/forum/remark,13122126 Fri, 08 Apr 2005 16:48:42 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13121271 Skyrunner8 : This is great. Only request. Is there any way to have the Router Name also? I know that I will be moving inbetween 2 routers, so it would be nice to be able to see the name, (even though yes, i do know where i am :-p)

and a side note, is the Load the CPU load of the router? or the percent of bandwitdh being used.
--
-Jeff]]> http://www.dslreports.com/forum/remark,13121271 Fri, 08 Apr 2005 15:09:05 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13121055 Bill : Very cool! Got it working, thanks.

You were right, I hadn't modified the password that the "Load" meters were using to get their data.

Thanks again :)
--
The new Secure-Wifi.net is open!
]]> http://www.dslreports.com/forum/remark,13121055 Fri, 08 Apr 2005 14:42:00 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13119816 digiblur :
said by Bill See Profile:

Mine is reporting the "Router Load", "WLAN TX", "WLAN RX", "WAN TX" and "WAN RX", but it times out on "Uptime", "WAN IP", "WLAN Rate" and "WLAN Ch".

Am I doing something wrong here?
The ones you are reporting are pulled via the SNMP plugin. What firmware version are you using?

Check your settings on the meters, you may not have the correct IP and/or password on the "Load" meters.
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device.]]> http://www.dslreports.com/forum/remark,13119816 Fri, 08 Apr 2005 12:06:37 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13119815 Bill : I'm running Alchemy (Firmware Version: Alchemy-6.0-RC1.w42 V2.04.4.8sv), maybe it's not working because I have a modified version of the firmware?
--
The new Secure-Wifi.net is open!
]]> http://www.dslreports.com/forum/remark,13119815 Fri, 08 Apr 2005 12:06:29 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13119802 digiblur : The plugin was developed for the Alchemy firmware which is what I use on my only WRT54G. Some of the plugin's functions like the DHCP list may work on other firmwares. If anyone would like this adapted to another firmware or another model Linksys router feel free to drop me a PM. If there is a enough need and someone can send the HTML sources from the router/firmware model I'll see about developing another plugin if needed.

FYI.. I currently have a BEFSR81 and a WRV54G in the drawer to possibly develop plugins for.
--
FWD#64466(6PM-11PM GMT-5)
»[Sipura] Make your Sipura Speak! - Step by Step
»[Monitoring] Samurize plugin for Alchemy
Drop me a PM if you'd like a custom Samurize plugin for your device.]]> http://www.dslreports.com/forum/remark,13119802 Fri, 08 Apr 2005 12:04:47 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13119746 Bill : Mine is reporting the "Router Load", "WLAN TX", "WLAN RX", "WAN TX" and "WAN RX", but it times out on "Uptime", "WAN IP", "WLAN Rate" and "WLAN Ch".

Am I doing something wrong here?
--
The new Secure-Wifi.net is open!
]]> http://www.dslreports.com/forum/remark,13119746 Fri, 08 Apr 2005 11:58:32 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13119086 pipdipchip : I posted this on my site, »www.wrt54g.com. If you are having problems with the cox.net D/L.
--
CCNA Training in Progress - Webmaster of WRT54G.com]]> http://www.dslreports.com/forum/remark,13119086 Fri, 08 Apr 2005 10:35:30 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13112392 digiblur : Look about 2 or 3 posts above.]]> http://www.dslreports.com/forum/remark,13112392 Thu, 07 Apr 2005 15:52:12 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13111239 s1ngs1ng : so how do i use the SAM file with my linksys with DD-RWT firmware?

thanks]]> http://www.dslreports.com/forum/remark,13111239 Thu, 07 Apr 2005 12:54:06 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13109520 digiblur :
said by s1ngs1ng See Profile:

so when the executable file will be relase?

cheers
There is no executable. It's a DLL plugin for Samurize.
--
FWD#64466(6PM-11PM GMT-5) - »[Sipura] Make your Sipura Speak! - Step by Step]]> http://www.dslreports.com/forum/remark,13109520 Thu, 07 Apr 2005 08:27:05 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13108884 s1ngs1ng : so when the executable file will be relase?

cheers]]> http://www.dslreports.com/forum/remark,13108884 Thu, 07 Apr 2005 03:36:55 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13107408 digiblur : 1. The provided Samurize config file is for example only. You are more than welcome to create your own. This is what Samurize is all about!

2. Router Load, WLAN TX, WLAN RX, WAN TX, WAN RX, and the dual layer Histogram(max value set to my ISP connection speed) are obtained using SNMP. The OID's might be different on your WRT54g. These were obtained using GetIf on a WRT54g V2.0.

3. The sample file contains three meters above the "box" - LoadAlchemyStatus, LoadAlchemyWireless, LoadAlchemyDHCP. These are set to 192.168.1.1 and the password of admin.

4. LoadAlchemyStatus is required if you want to use the functions RouterFirmware, RouterIP, RouterGateway, and RouterUptime. In my testing this function kills the HTTP pages of the WRT54g if the update interval is set to low. I have mine set to update every 180 minutes and will still kill the pages at times.

5. LoadAlchemyWireless is required if you want to use the functions WirelessRate, WirelessChannel, and WirelessClients.

6. LoadAlchemyDHCP is required if you want to use DHCPHost, DHCPIP, DHCPMAC, and DHCPExpire functions. Each of these functions require an index number. The first entry of the DHCP table starts at 0. In my example I included only displays the first 8 DHCP table entries, you are more than welcome to expand this further.

7. Do not be alarmed when the MACID is shown as the wireless client ID. This is due to the way I coded the DHCP matching engine to keep the number of HTTP pulls down. Once the plugin finds a MAC ID displayed, a flag is set to pull the DHCP table during the next update. At the next update the MAC ID will change to the host name provided in the DHCP table. The DHCP table is only pulled when needed this way. If LoadAlchemyDHCP is used, the MAC ID's will only be converted to the hostname when the LoadAlchemyDHCP meter is pulled.

Samurize needs to be installed first - go to Samurize.com to get it.

Download: »members.cox.net/wrt54g/AlchemyStats0.3.sam

If you installed Samurize, SAM files will be associated with the Samurize Import Tool. Double click the SAM file from the ZIP file.
--
FWD#64466(6PM-11PM GMT-5) - »[Sipura] Make your Sipura Speak! - Step by Step]]> http://www.dslreports.com/forum/remark,13107408 Wed, 06 Apr 2005 22:51:57 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13102223 digiblur :
said by s1ngs1ng See Profile:

is this SAM is another Firmware to be uploaded?
Can i use my DD-RWT 2.2 #3.2 as the firmware to be use together?

Thanks
All you can do is try when I release the later release. Depends on how much they changed with the web pages on DD-WRT.
--
FWD#64466(6PM-11PM GMT-5) - »[Sipura] Make your Sipura Speak! - Step by Step]]> http://www.dslreports.com/forum/remark,13102223 Wed, 06 Apr 2005 12:28:51 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13100565 s1ngs1ng : is this SAM is another Firmware to be uploaded?
Can i use my DD-RWT 2.2 #3.2 as the firmware to be use together?

Thanks]]> http://www.dslreports.com/forum/remark,13100565 Wed, 06 Apr 2005 08:05:52 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,13099839 digiblur : Added DHCP Table code. Should work with other firmwares too, but it's not tested. I should have this out for release within a few days if it passes all the tests.
--
FWD#64466(6PM-11PM GMT-5) - »[Sipura] Make your Sipura Speak! - Step by Step
]]> http://www.dslreports.com/forum/remark,13099839 Wed, 06 Apr 2005 02:03:33 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,12956908 imrf : Thanks. Just downloaded and installed this plugin. Lucky for me I use the default settings for the router and no re-config was needed. Looks nice and so far functions well.]]> http://www.dslreports.com/forum/remark,12956908 Sun, 20 Mar 2005 12:31:27 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,12956748 digiblur : Sorry the long wait...

A few things to be aware of:
1. The provided Samurize config file is for example only. You are more than welcome to create your own. This is what Samurize is all about! Smile

2. Router Load, WLAN TX, WLAN RX, WAN TX, WAN RX, and the dual layer Histogram(max value set to my ISP connection speed) are obtained using SNMP. The OID's might be different on your WRT54g. These were obtained using GetIf on a WRT54g V2.0.

3. The sample file contains two meters above the "box" - LoadAlchemyStatus, LoadAlchemyWireless. These are both set to 192.168.1.1 and the password of admin.

4. LoadAlchemyStatus is required if you want to use the functions RouterFirmware, RouterIP, RouterGateway, and RouterUptime. In my testing this function kills the HTTP pages of the WRT54g if the update interval is set to low. I have mine set to update every 180 minutes.

5. LoadAlchemyWireless is required if you want to use the functions WirelessRate, WirelessChannel, and WirelessClients.

6. Do not be alarmed when the MACID is shown as the wireless client ID. This is due to the way I coded the DHCP matching engine to keep the number of HTTP pulls down. Once the plugin finds a MAC ID displayed, a flag is set to pull the DHCP table during the next update. At the next update the MAC ID will change to the host name provided in the DHCP table. The DHCP table is only pulled when needed this way.

Now time to play:

Samurize needs to be installed first - go to Samurize.com to get it.

Download: »members.cox.net/wrt54g/AlchemyStats0.2.sam

If you installed Samurize, SAM files will be associated with the Samurize Import Tool. Double click the SAM file.

Open the Samurize Config tool and open the AlchemyStats_Sample.Ini file. Make any needed changes to the configuration(Ip's, Passwords, etc)

Startup Samurize and select the AlchemyStats_Sample file. You might also make the change to keep Samurize pinned to your desktop so it doesn't get in your way.

If you have any questions, comments, or bugs feel free to respond here or call me via FWD at 64466, just remember I'm at GMT-6.
--
FWD#64466 - »[Sipura] Make your Sipura Speak! - Step by Step]]> http://www.dslreports.com/forum/remark,12956748 Sun, 20 Mar 2005 12:06:13 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,12784167 johnh123 : Great. I'll be looking forward to it.]]> http://www.dslreports.com/forum/remark,12784167 Sun, 27 Feb 2005 14:08:57 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,12767366 digiblur :
said by johnh123 See Profile:

I hope you will upload this at the samurize site when you are finished- it looks great!
This project has currently been put on the back burner as it is taking more time than I thought due to the HTTP service half-dying on the router all the time. My plugin developing time is currently devoted towards my Talking Caller ID plugin for the Sipura at this time. I should be able to work on this within a week or two and something ready to go then.
--
FWD#297248]]> http://www.dslreports.com/forum/remark,12767366 Fri, 25 Feb 2005 12:08:44 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,12751051 Trimline :
said by digiblur See Profile:

said by Trimline See Profile:
BTW, does your wife still talk to you? :)
LOL...do you have any other devices in mind?

There are many machines on Meps (Dune, the movie).... :):)
--
FWD#537129]]> http://www.dslreports.com/forum/remark,12751051 Wed, 23 Feb 2005 18:01:41 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,12749984 johnh123 : I hope you will upload this at the samurize site when you are finished- it looks great!]]> http://www.dslreports.com/forum/remark,12749984 Wed, 23 Feb 2005 16:12:59 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,12726327 digiblur :
said by Trimline See Profile:

said by digiblur See Profile:

said by ahubbard See Profile:

I'm going to run out of devices to build plugins for before too long. ;)
We'll fund you! Just keep up the fantistic work! BTW, does your wife still talk to you? :)
Somehow I still manage to find time for the significant other, the kids, my normal paying job, and all the other projects have going on.

LOL...do you have any other devices in mind?

The plugin is currently going under a rewrite to try to solve the WRT54g HTTP interface dying. When I'm finished with it, there will be two poll times for the plugin. One poll time will be the wireless clients and the other will be the router status page. The DHCP table will only be read when needed. During startup of the plugin it will read the DHCP table and store it. If a MAC ID is detected in the wireless clients, it will be look for the host name in the stored table, if it's not found it will pull the DHCP table to get it and update the stored table. This will stop unnecessary polls of the DHCP page of the router.

The screen shot I included also grab stats from the WRT54g via SNMP, so SNMP will be required on the router.
--
FWD#297248]]> http://www.dslreports.com/forum/remark,12726327 Sun, 20 Feb 2005 23:25:36 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,12724616 Trimline :
said by digiblur See Profile:

said by ahubbard See Profile:

I'm going to run out of devices to build plugins for before too long. ;)
We'll fund you! Just keep up the fantistic work! BTW, does your wife still talk to you? :)
--
FWD#537129]]> http://www.dslreports.com/forum/remark,12724616 Sun, 20 Feb 2005 19:32:47 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,12724474 pipdipchip : That is awesome. Any ETA for release?]]> http://www.dslreports.com/forum/remark,12724474 Sun, 20 Feb 2005 19:14:26 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,12723068 digiblur :
said by ahubbard See Profile:

digiblur, you're a samurize maven... do i have to hop from forum to forum to find all your plugins? :)
I'm going to run out of devices to build plugins for before too long. ;)
--
FWD#297248]]> http://www.dslreports.com/forum/remark,12723068 Sun, 20 Feb 2005 15:56:49 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,12722849 ahubbard : digiblur, you're a samurize maven... do i have to hop from forum to forum to find all your plugins? :)]]> http://www.dslreports.com/forum/remark,12722849 Sun, 20 Feb 2005 15:20:39 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,12722477 digiblur : I'm having some problems with the WRT54g's HTTP interface falling on its face after after a few hours, as soon as I get some of the problems worked out I'll let you guys know.
--
FWD#297248]]> http://www.dslreports.com/forum/remark,12722477 Sun, 20 Feb 2005 14:32:38 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,12720721 sonarman : Where can it be downloaded from? Looks good]]> http://www.dslreports.com/forum/remark,12720721 Sun, 20 Feb 2005 09:47:37 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,12720484 wrtman : when will this be available. it looks cool.]]> http://www.dslreports.com/forum/remark,12720484 Sun, 20 Feb 2005 08:46:15 EDT Re: [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,12720458 Trimline : That's cool!
--
FWD#537129]]> http://www.dslreports.com/forum/remark,12720458 Sun, 20 Feb 2005 08:38:16 EDT [Monitoring] Samurize plugin for Alchemy http://www.dslreports.com/forum/remark,12711474 digiblur : Here's a sneak peek at an upcoming Alchemy plugin for Samurize. As you can see from the screenshot, if a pc name is available in the DHCP table, the MAC ID of the wireless client is replaced with a user friendly host name. ;)
--
FWD#297248
]]> http://www.dslreports.com/forum/remark,12711474 Fri, 18 Feb 2005 23:24:00 EDT