| reply to funchords
Re: AirLink 108mbps router I've pulled the top off my airlink ap411w and all the #s are the same as the dwl-2100. The card's # is 8wapg02..4a1, all the chips appear the same, the only (visable) difference is the second antenna. I found this link »translate.google.com/translate?h···zilla:en -US:official_s%26sa%3DG
of someone that pulled apart a 2100. *EDIT* link looks funny, if it doesn't work do a google search for atheros ar2313a and click translate on the bottom one. *EDIT*
I also found this link
»dslrcs.clanspace.com/forum/remar···ode=flat
of some guys trying to update the firmware on thier conceptronics AP. One of the guys explains how to hack the d-link config tool to be used with his conceptronics. I followed his instructions and I could see my ap411w with the config tool, but would error out using it. Further down the thread sTEELER77 explains how to flash fail your AP making it come up in "failed" mode allowing it to be updated to a D-link firmware. Anyone think this will work? |
|
| Curious if anyone has found anymore information regarding
the dwl-2100 and using the firmware on the airlink ap411w?
Also has anyone or 'slo50h' been able to get the link
above working? I've tried 2 different isp's and both report a blocked ip.
Regards! |
|
| Never mind found it over in the other forum topics. |
|
|
|
