Re: 100% Security During Boot 4 Peanuts !

Author

All Replies

SpannerITWks
Premium
join:2005-04-22

1 edit

reply to SpannerITWks

Quad Contacts Option

The possibility of requiring a Dummy Load for some setups is a valid point. I would suggest trying it without first, and if you feel it needs it then check your equipment data for the correct Resistance/s - Impedance/s to apply.

If you have a CAT5 etc installation with symetrical INs and OUTs, then you can use a Single Relay with Quad switched contacts or 2 Relays with their Coils wired in Parallel as in my Screeny.

If you find that more gain is required to switch the Relay/s then you can easily replace the NPN Q1 with a higher gain device. This could be just a similar type with increased gain, or a Darlington Transitor eg TIP110 or equivalent which have significantly higher gain.

Regards,

Spanner
--
I Only Know What I Know But I'm Learning all The Time -

Stay Safe -

Spanner intheWorks
/SpannerITWks

to forum · permalink · 2005-05-04 18:18:07 ·

seanm6869
Premium
join:2002-12-03
Versailles, KY

cant you just disable the nic in network connections? i have a n icon on my desktop when i leave my computer on over night.. just disable it and leave.
--
MY Forum http://www.mainstreamtopics.com/forums

to forum · permalink · 2005-05-05 12:43:30 ·

Broadband Tech > Security > Security > 100% Security During Boot 4 Peanuts !

Re: 100% Security During Boot 4 Peanuts !