http://www.dslreports.com/forum/r14310320 en Sun, 29 Nov 2009 09:43:04 EDT Sun, 29 Nov 2009 09:43:04 EDT http://www.dslreports.com/forum/remark,14385955 anon : If informations above doesn't help --> visit that link »homepage.ntlworld.com/linksysinfo/revival/
It realy works!!! I lost warranty but my WRT54G works GREAT :):):)]]> http://www.dslreports.com/forum/remark,14385955 Sat, 17 Sep 2005 17:44:04 EDT http://www.dslreports.com/forum/remark,14350370 NyQuil Kid : I had this happen on a WRT54GC - while I didn't want to open it up, and since there isn't any 3rd party firmware out for this model (the source code hasn't been released), I just sent it back for a replacement - this time, I won't be flashing it.

[8F] The NyQuil Kid
--
[8F] The NyQuil Kid comes into town not looking for trouble... n00bz gang up, but he ain't seein' double,... pulls and draws, his deagles two... n00bz litter the ground you know it's true.]]> http://www.dslreports.com/forum/remark,14350370 Mon, 12 Sep 2005 21:28:11 EDT http://www.dslreports.com/forum/remark,14350347 srinu_028 : try reflashing the firmware with a hard wired computer only.then do a reset,and then see what happens.if its still not working call linksys the warrenty for this router is 3 years i guess.]]> http://www.dslreports.com/forum/remark,14350347 Mon, 12 Sep 2005 21:25:20 EDT http://www.dslreports.com/forum/remark,14345808 jimmi1311 : Thanks for the ideas until now. But it doesn't help.

When a try to upload the firmware: openwrt-wrt54g-squashfs. I get a time out. I have tried 10 times or more.

Any other suggestion? ]]> http://www.dslreports.com/forum/remark,14345808 Mon, 12 Sep 2005 10:44:50 EDT http://www.dslreports.com/forum/remark,14342107 activea : STEP BY STEP .... How to Upgrage Linksys WRT54G v3.1 4.00.7 -> Alchemy v1.0

First of all if you try to upgrade wrt54g from the version 4.00.7 to Alchemy v1.0 via the web interface ...you will find out that it's impossible!!

The solution is to download WRT54GV3.0_3.03.6_US_code.bin ( »ftp://ftp.linksys.com/pub/network/ )and upload it to your V3.1 4.00.7 version of Linksys firmware which ships with the product.

After that when you will have changed to version 3.03.6 you will be able to upload Alchemy_V1.0.bin via the web interface!

---------------------------------------------------
If something goes wrong (as always!) and your Linksys WRT54G v3.1 seems to be DEAD (as mine a few hours ago!) DONT'T PANIC! You just need openwrt-wrt54g-squashfs.bin ( »downloads.openwrt.org/people/nbd···russian/ )

So if you see that the Power green led blinks like crazy.. just reboot Linksys and run from dos prompt:

tftp -i 192.168.1.1 put openwrt-wrt54g-squashfs.bin

Maybe you'll need to do that 2, 3 times.. It'll work!! Just reboot again the Linksys and then do..

telnet 192.168.1.1

The next step is to enable boot_wait .. so.... write....

nvram set boot_wait=on
nvram get boot_wait
nvram commit

that all folks.. Close the TV and go to sleep!.. Yes you are ready now to upgrade you Linksys with the WRT54GV3.1_4.00.7_US_code.bin file!!!
Reboot Linksys and write...

tftp -i 192.168.1.1 put WRT54GV3.1_4.00.7_US_code.bin

(try 2,3 times if didn't work at the first time!)
then go to the procedure reading the begining of this email! »192.168.1.1 .... bla bla bla!!!

Just rememeber that during these procedure you must have your linksys connected to your pc via utp cable and your pc should have ip:192.168.1.2 gateway 255.255.255.0

Good Luck!!

And don't worry.. Linksys is all the $$$$

Regards,

Thanassis (ActiveA)

Athens Wireless Metropolitan Network »www.AWMN.gr]]> http://www.dslreports.com/forum/remark,14342107 Sun, 11 Sep 2005 19:01:39 EDT http://www.dslreports.com/forum/remark,14341263 anon : I had the same problem with you and i fixed it...

Check.. »forum.openwrt.org/viewtopic.php?pid=11192

1.Download openwrt-wrt54g-squashfs.bin
2. Reboot Linksys WRT54G v3.1 and ..
3. tftp -i 192.168.1.1 put openwrt-wrt54g-squashfs.bin
4. OK!
5. Reboot and enable boot_wait after reading the manuals of openwrt!

It's So Simple!

Regards,
Thanassis (ActiveA)
Athens Wireless Metropolitan Network]]> http://www.dslreports.com/forum/remark,14341263 Sun, 11 Sep 2005 16:29:10 EDT http://www.dslreports.com/forum/remark,14317290 jimmi1311 : Thanks, for the links.

But I have tried both, with no luck.

An other suggestion??]]> http://www.dslreports.com/forum/remark,14317290 Thu, 08 Sep 2005 04:44:38 EDT http://www.dslreports.com/forum/remark,14310951 Lanik : See if any of these help:
»Linksys FAQ »Help! My router is dead after I upgraded firmware!
»Linksys FAQ »Help, my router is still dead!
--
A slave to corporate America.]]> http://www.dslreports.com/forum/remark,14310951 Wed, 07 Sep 2005 10:36:13 EDT http://www.dslreports.com/forum/remark,14310320 jimmi1311 : Hello anyone

I have a typical problem.

I have tried to install a new firmware and it didn't worked. Now my power-lamp blink all the time.

Then I have tried to reset it, to upload a new firmware with tftp. But nothing seams to help.

I can pin the router, but nothing more.

Any suggestion??

Best regards
Jimmi]]> http://www.dslreports.com/forum/remark,14310320 Wed, 07 Sep 2005 08:30:11 EDT