rcilinkPremium
join:2003-12-15
Manchester, NH
4 edits | reply to rcilink
Re: [PAP2] Care and Feeding Instructions OK, I have tested the above process, and can report that the PAP2 takes the config. It seems to change the settings.
I just tested the "****" and got "configuration menu" spoken to me...  I wanted that to stop working too. I tried the RESET# and it prompted for password, so that is working!! YAY!
Don't worry about encrypting the file, it is not required, as the profile rule we will use does not attempt to decrypt anything.
Here's a way to do it:
1. Copy the text above in the box and save it as lock-ivr.xml
2. Put this on a web server. It can be on your network (internal web server) or on a real web server.
3. Open a web browser to configure your Linksys PAP2 unit.
4. Under the provisioning tab change the profile rule to read: http: //192.168.1.76/pap2/lock-ivr.xml (do not put a space after http: and before //192.168.1.76/pap2/lock-ivr.xml )
* Sorry about the mutilation, this forum does that to http links..
NOTE: this assumes your web server is at 192.168.1.76 and that the lock-ivr.xml is in the pap2 folder on the web server.
5. Set the provision enable to YES.
6. Save settings on the Linksys PAP2 unit.
7. The PAP2 will reboot itself. after approx 2 seconds, it will attempt to download the XML file. (be patient! give it up to 1 minute to update itself!)
8. Refresh the Linksys PAP2 screen (even if it did refresh itself).
9. The XML file (if you copied the contents from above) will automatically turn off provisioning (provision enable=no), so that is one way to verify it worked.
--
I did not want to reset my PAP2, but I would guess it will take the "4321" (admin Password) to do it.
read notes above. it changes admin pw to 4321 and user pw to 1234 also. (you can login and change them later.) |
|
 qsg1049Just Fix ItPremium
join:2003-05-19
Crystal Lake, IL | said by rcilink:7. The PAP2 will reboot itself. after approx 2 seconds, it will attempt to download the XML file. (be patient! give it up to 1 minute to update itself!) When I saved the config, my web browser indicated that the PAP2 is rebooting and it refreshed but I didnt see it grabbing the xml from the tftp server. I ended up power cycling the unit and it got it.
Should I also edit the Profile Rule back to "/spa$PSN.cfg"? I guess I should but wasnt indicated on your steps above.
The three things did happen afterwards :
1. Provisioning was turned to off
2. IVR would ask for a password after **** + RESET#
3. Web browser admin password is 4321.
Thanks. |
|
rcilinkPremium
join:2003-12-15
Manchester, NH
1 edit | said by qsg1049:Should I also edit the Profile Rule back to "/spa$PSN.cfg"? I guess I should but wasnt indicated on your steps above. I did not bother to put that back, because it is not really useful to anyone. If you wish, you may put the "/spa$PSN.cfg" back in the profile rule.
Since the Provision Enable is set to NO, it will have no effect. |
|
